C64-USB-C-PD-Power-Adapter
mamejay·C64-USB-C-PD-Power-Adapter·Hardware/KiCad/C64 USB-C PD Power Adapter.kicad_pcb
About the C64-USB-C-PD-Power-Adapter PCB
C64-USB-C-PD-Power-Adapter is an open source PCB design by mamejay, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 46.1 × 30 mm, with 39 components from 23 distinct parts.
Other key parts include the CH224A and TPS54302DDCR. By type, the board carries 14 capacitors, 12 resistors, 3 ICs, 3 diodes, 2 connectors and 2 fuses.
It belongs with the retro computing and power & battery designs in this gallery.
From the project
USB-C PD power adapter for the Commodore 64 (KiCad, JLCPCB-ready)
A compact replacement power supply for the Commodore 64. It plugs straight into the C64's 7-pin DIN power socket and runs from any USB-C Power Delivery charger that offers 15 V.
Status: v0.3, routed, JLCPCB files generated, not yet built or tested.
v0.3 (cost-down): - All passives are 0603 JLC Basic parts. - The TVS diodes are JLC Preferred parts. - Both bucks share one inductor (FXL0530). - The PTC fuses became 0R links. The 1206 footprints still take a PTC if you want one. - 5 V feedback is now 75k/10k (5.07 V). - Extended parts went from 15 to 4: CH224A, TPS54302, USB-C, inductor.

Main components on the C64-USB-C-PD-Power-Adapter
C64-USB-C-PD-Power-Adapter bill of materials (BOM)
39 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH224A | SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U1 |
| 2 | TPS54302DDCR | TSOT-23-6 | U2, U3 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | C165948 USB-C (power in) | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | C64 POWER (DIN-7 male) | DIN-7_Male_PCB_C64 | J2 |
| 2 | C17888 0R | R_1206_3216Metric | F1, F2 |
| 1 | SMF5.0A | D_SOD-123F | D1 |
| 1 | SMF13A | D_SOD-123F | D2 |
| 1 | C2297 GREEN | LED_0805_2012Metric | D3 |
| 2 | 10UH 10uH | L_Changjiang_FXL0530 | L1, L2 |
| 1 | 1UF/50V 1uF/50V | C_0603_1608Metric | C1 |
| 5 | 100NF/50V 100nF/50V | C_0603_1608Metric | C2, C4, C5, C10, C11 |
| 2 | 10UF/25V 10uF/25V | C_0805_2012Metric | C3, C9 |
| 4 | 22UF/25V 22uF/25V | C_0805_2012Metric | C6, C7, C12, C13 |
| 2 | 100PF 100pF | C_0603_1608Metric | C8, C14 |
| 1 | 56K 56k | R_0603_1608Metric | R1 |
| 3 | 100K 100k | R_0603_1608Metric | R2, R3, R11 |
| 2 | 470K 470k | R_0603_1608Metric | R4, R9 |
| 2 | 47K 47k | R_0603_1608Metric | R5, R10 |
| 1 | 75K 75k | R_0603_1608Metric | R6 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10K 10k | R_0603_1608Metric | R7 |
| 1 | 1k | R_0603_1608Metric | R8 |
| 1 | 5.1K 5.1k | R_0603_1608Metric | R12 |
C64-USB-C-PD-Power-Adapter design files
The KiCad project lives in the mamejay/C64-USB-C-PD-Power-Adapter repository on GitHub; these links point at the commit this page was built from.
C64-USB-C-PD-Power-Adapter: common questions
How big is the C64-USB-C-PD-Power-Adapter PCB?
The C64-USB-C-PD-Power-Adapter measures 46.1 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the C64-USB-C-PD-Power-Adapter?
39 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the C64-USB-C-PD-Power-Adapter design files?
From the mamejay/C64-USB-C-PD-Power-Adapter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the C64-USB-C-PD-Power-Adapter design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k