HardLabs

Test--AI

mananvyas2003·test--AI

This repository ships a schematic but no board layout.

About the Test--AI PCB

Test--AI is an open source ESP32 PCB design by mananvyas2003, published on GitHub. It is a board, with 26 components from 13 distinct parts.

Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the ADS1115IDGS, CH340C and AP2112K-3.3. By type, the board carries 10 resistors, 8 capacitors, 4 ICs, 2 transistors and 2 connectors.

From the project

Describe a board in plain English and get back a schematic (.kicadsch), a bill of materials with real part numbers, a netlist, an electrical rule check, and an automatic verification pass** — all from one prompt.

Describe a board in plain English and get back a schematic (.kicadsch), a bill of materials with real part numbers, a netlist, an electrical rule check, and an automatic verification pass** — all from one prompt.

This repository began as a KiCad schematic parser / netlist analyzer. That engine is now the verification backbone of a full generation pipeline:

The generator writes a schematic; the original parser reads it straight back and the net-resolver reconstructs the nets. If the reconstructed nets match the design, the board is verified — a genuine closed loop.

Main components on the Test--AI

ESP32-WROOM-32EADS1115IDGSCH340CAP2112K-3.3

Test--AI bill of materials (BOM)

26 components, 13 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32E
U1
1
ADS1115IDGS
U2
1
CH340C
U4
1
AP2112K-3.3
U5
2
MMBT3904
Q1, Q2
1
USB_C_Receptacle_USB2.0_16P
J1
1
AudioJack4
J2
4
10uF
C1, C5, C6, C7
3
0.1uF
C2, C3, C8
1
1uF
C4
6
10k
R1, R2, R7, R8, R9, R10
2
5.1k
R3, R4
2
4.7k
R5, R6

Test--AI design files

The KiCad project lives in the mananvyas2003/test--AI repository on GitHub; these links point at the commit this page was built from.

Test--AI: common questions

What microcontroller does the Test--AI use?

The Test--AI is built around the ESP32-WROOM-32E, from the ESP32 family.

How many components are on the Test--AI?

26 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Test--AI design files?

From the mananvyas2003/test--AI repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Test--AI design in my own project?

The repository has no license, so all rights stay with mananvyas2003. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Test--AI without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards