Display breakout small

markantosa·embo·hardware/electrical/display_breakout_small/display_breakout_small.kicad_pcb

Display breakout small layout, top view — open source board by markantosa

About the Display breakout small

Display breakout small is an open source PCB design by markantosa, published on GitHub. It is a 2-layer board measuring 52 × 62.5 mm, with 18 components from 8 distinct parts.

By type, the board carries 6 resistors, 5 capacitors, 3 switches, 2 connectors, 1 transistor and 1 buzzer.

It belongs with the dev boards & breakouts, robotics & motion and displays & leds designs in this gallery.

From the project

[SUTD 30.007] Embolisation agent characterisation and automated mixing system

KiCad schematic and PCB layout for the EMBO ESP32-S3 control board.

Current fabricated/in-progress revision: v3.4 (hardware/electrical/embo main MCU PCB v34/). The prior embo main MCU PCB v25/ folder is kept for reference only — see below for what changed between them.

Full design specification, component values, GPIO assignments, layout rules, BOM, and pre-submission checklist: /docs/EMBOPCBDesignBriefv34.txt`

Display breakout small bill of materials (BOM)

18 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
2N7002
Q1
1
CONN_02X10_ODD_EVEN
Conn_02x10_Odd_Even
J1
1
CONN_01X14_SOCKET
Conn_01x14_Socket
J2
1
Buzzer
BZ1
1
RotaryEncoder_Switch
SW1
2
SW_Push
SW2, SW3
5
100NF
100nF
C1, C2, C3, C4, C5
6
10K
10k
R2, R3, R4, R5, R6, R7

Display breakout small design files

The KiCad project lives in the markantosa/embo repository on GitHub; these links point at the commit this page was built from.

Display breakout small: common questions

How big is the Display breakout small?

The Display breakout small measures 52 × 62.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Display breakout small?

18 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Display breakout small design files?

From the markantosa/embo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Display breakout small design in my own project?

The repository has no license, so all rights stay with markantosa. Use it as a reference, and ask the author before reusing the design.

More boards in embo

Similar boards