Rg PCB

markantosa·embo·hardware/electrical/Rg board/Rg PCB/Rg PCB.kicad_pcb

Rg PCB layout, top view — open source board by markantosa

About the Rg PCB

Rg PCB is an open source PCB design by markantosa, published on GitHub. It is a 2-layer board measuring 16.7 × 21.1 mm, with 7 components from 3 distinct parts.

By type, the board carries 3 capacitors, 3 resistors and 1 connector.

It belongs with the robotics & motion designs in this gallery.

From the project

[SUTD 30.007] Embolisation agent characterisation and automated mixing system

KiCad schematic and PCB layout for the EMBO ESP32-S3 control board.

Current fabricated/in-progress revision: v3.4 (hardware/electrical/embo main MCU PCB v34/). The prior embo main MCU PCB v25/ folder is kept for reference only — see below for what changed between them.

Full design specification, component values, GPIO assignments, layout rules, BOM, and pre-submission checklist: /docs/EMBOPCBDesignBriefv34.txt`

Rg PCB bill of materials (BOM)

7 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Conn_01x04
J2
3
C
C1, C2, C3
3
R
R1, R2, R3

Rg PCB design files

The KiCad project lives in the markantosa/embo repository on GitHub; these links point at the commit this page was built from.

Rg PCB: common questions

How big is the Rg PCB?

The Rg PCB measures 16.7 × 21.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rg PCB?

7 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rg PCB design files?

From the markantosa/embo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rg PCB design in my own project?

The repository has no license, so all rights stay with markantosa. Use it as a reference, and ask the author before reusing the design.

More boards in embo

Similar boards