MAX30102
markantosa·embo·hardware/electrical/MAX30102 PCB/MAX30102/MAX30102.kicad_pcb
About the MAX30102 PCB
MAX30102 is an open source PCB design by markantosa, published on GitHub. It is a 2-layer board measuring 36.8 × 17.8 mm, with 3 components from 2 distinct parts.
It belongs with the robotics & motion designs in this gallery.
From the project
[SUTD 30.007] Embolisation agent characterisation and automated mixing system
KiCad schematic and PCB layout for the EMBO ESP32-S3 control board.
Current fabricated/in-progress revision: v3.4 (hardware/electrical/embo main MCU PCB v34/). The prior embo main MCU PCB v25/ folder is kept for reference only — see below for what changed between them.
Full design specification, component values, GPIO assignments, layout rules, BOM, and pre-submission checklist: /docs/EMBOPCBDesignBriefv34.txt`
MAX30102 bill of materials (BOM)
3 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
MAX30102 design files
The KiCad project lives in the markantosa/embo repository on GitHub; these links point at the commit this page was built from.
MAX30102: common questions
How big is the MAX30102 PCB?
The MAX30102 measures 36.8 × 17.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MAX30102?
3 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MAX30102 design files?
From the markantosa/embo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MAX30102 design in my own project?
The repository has no license, so all rights stay with markantosa. Use it as a reference, and ask the author before reusing the design.
More boards in embo
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979