Embo
markantosa·embo·hardware/electrical/embo main MCU PCB v3_4/embo.kicad_pcb
About the Embo PCB
Embo is an open source ESP32 PCB design by markantosa, published on GitHub. It is a 4-layer board measuring 96.4 × 76.1 mm, with 121 components from 52 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the OPA2354, LM2596S-5 and AMS1117-3.3. By type, the board carries 14 connectors, 5 ICs, 2 LEDs, 1 transistor and 1 fuse.
It belongs with the robotics & motion designs in this gallery.
From the project
[SUTD 30.007] Embolisation agent characterisation and automated mixing system
KiCad schematic and PCB layout for the EMBO ESP32-S3 control board.
Current fabricated/in-progress revision: v3.4 (hardware/electrical/embo main MCU PCB v34/). The prior embo main MCU PCB v25/ folder is kept for reference only — see below for what changed between them.
Full design specification, component values, GPIO assignments, layout rules, BOM, and pre-submission checklist: /docs/EMBOPCBDesignBriefv34.txt`
Main components on the Embo
Embo bill of materials (BOM)
121 components, 52 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | OPA2354 | SOIC-8_3.9x4.9mm_P1.27mm | IC1, IC2 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | LM2596S-5 | TO-263-5_TabPin3 | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | AO4407A | SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 2 | Conn_Coaxial | SMA_Molex_73251-1153_EdgeMount_Horizontal | J1, J2 |
| 1 | Conn_01x03 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 4 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4, J5, J15_1, J15_2 |
| 1 | motor 1 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | motor 2 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | 5V out | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8 |
| 1 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | IDC-Header_2x10_P2.54mm_Vertical | J9 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J13 |
| 1 | 24 V PSU input | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J14 |
| 1 | 3.3V out | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J16 |
| 17 | 100nF X7R | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C_BOOT1, C_adc1, C_inBU_C1, CdecAD_C1, CdecES_C1, CdecO1_C1, CdecO2_C1, CdecT1_C1 +9 |
| 1 | 1µF X7R | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C_EN1 |
| 1 | 10nF X7R | C_0402_1005Metric | C_envRC1 |
| 1 | 100 µF 50 V radial | C_Radial_D8.0mm_H11.5mm_P3.50mm | C_inBU_E1 |
| 4 | 10µF X5R 0805 | C_0805_2012Metric | CdecAD_C8, CdecES_C8, CdecO1_C8, CdecO2_C8 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100µF 35V electrolytic radial | CHEMI-HA0 | CdecT1_E1, CdecT2_E1 |
| 2 | 10µF 10V tantalum Case A | CP_EIA-3216-18_Kemet-A_HandSolder | CinLD_T1, CouLD_T1 |
| 1 | 220µF 10V low-ESR electrolytic radial | C_Radial_D8.0mm_H11.5mm_P3.50mm | CouBU_E1 |
| 1 | 1nF X7R | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | Csnub1 |
| 1 | SS34A | D_SMA | Dcatch1 |
| 1 | SMBJ28A | D_SMA | Dclamp1 |
| 1 | BAT54 | D_SOD-123 | Denv1 |
| 1 | BZX84C15, 15 V Zener, SOT-23 | SOT-23 | Dprot1 |
| 2 | BAV99 | SOT-23 | Drx1, Drx2 |
| 1 | 1N5819 | D_SOD-123 | Dusb1 |
| 1 | 5A littlefuse | Fuse_2512_6332Metric | F2 |
| 9 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | JGPIO45, Jdo_TMC1_extra1, Jdo_TMC1_extra2, Jdo_TMC2_extra1, Jdo_TMC2_extra2, Jup_TMC1_extra1, Jup_TMC1_extra2, Jup_TMC2_extra1 +1 |
| 6 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | JMP_MS1_T1, JMP_MS1_T2, JMP_MS2_T1, JMP_MS2_T2, JMP_PDN_T1, JMP_PDN_T2 |
| 1 | Conn_01x07 | PinSocket_1x07_P2.54mm_Vertical | J_AD9833 |
| 2 | Conn_01x02 | PinSocket_1x02_P2.54mm_Vertical | J_extra_T1_fem1, J_extra_T2_fem1 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J_extra_T1_mal1, J_extra_T2_mal1 |
| 1 | 100µH | L_Bourns_SRR1260 | Lbuck1 |
| 19 | 10kΩ 0402 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R_BOOT1, R_EN1, R_EN2, R_EN3, R_LEDpw1, R_M1S1, R_M1S2, R_M2S1 +11 |
| 1 | 47Ω | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R_TL1 |
| 1 | 1kΩ 0402 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R_UART1 |
| 2 | 5.1kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R_cc1, R_cc2 |
| 1 | 100Ω 0402 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R_in1 |
| 1 | 330Ω | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R_statLED1 |
| 1 | 4.7kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | Rbleed1 |
| 1 | 390Ω | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | RfO1_1 |
| 2 | 910Ω | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | RfO2_A1, RfO2_B1 |
| 3 | 100Ω | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | RgO1_1, RgO2_A1, RgO2_B1 |
| 4 | Conn_01x08 | PinSocket_1x08_P2.54mm_Vertical | SK1_T1, SK1_T2, SK2_T1, SK2_T2 |
| 2 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | SK4, SK5 |
| 2 | 6×6mm tactile | SW_PUSH_6mm | SW_boot1, SW_reset1 |
| 1 | LED_pwr | LED_0805_2012Metric | LED_pwr1 |
| 1 | green LED | LED_0805_2012Metric | LED_stat1 |
Embo design files
The KiCad project lives in the markantosa/embo repository on GitHub; these links point at the commit this page was built from.
Embo: common questions
What microcontroller does the Embo use?
The Embo is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Embo PCB?
The Embo measures 96.4 × 76.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Embo?
121 components, from 52 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Embo design files?
From the markantosa/embo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Embo design in my own project?
The repository has no license, so all rights stay with markantosa. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Embo without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in embo
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k