Esp32-ecu

markthebault·esp32-ecu·hardware/a3-compact/esp32-ecu.kicad_pcb

Esp32-ecu PCB layout, top view — open source ESP32 board by markthebault

About the Esp32-ecu PCB

Esp32-ecu is an open source ESP32 PCB design by markthebault, published on GitHub. It is a 6-layer board measuring 120 × 120 mm, with 214 components from 74 distinct parts.

Its main chip is the ESP32-S3-DevKitC-1-N8R8, from the ESP32 family. Other key parts include the Pololu 3792, LD1117V33, MAX1232EPA+, MCP120-315DI/TO and MCP3208-CI/P. By type, the board carries 81 resistors, 56 capacitors, 25 diodes, 18 connectors, 17 ICs and 7 transistors.

From the project

A 120 × 120 mm, six-layer, through-hole ECU development board with a plug-in ESP32-S3, configurable sensor readouts, live diagnostics and a printable gasketed enclosure.

A 120 × 120 mm, six-layer, through-hole ECU development board with a plug-in ESP32-S3, configurable sensor readouts, live diagnostics and a printable gasketed enclosure.

Bench prototype: all engine outputs remain disabled. Vehicle operation, surge/EMI immunity and physical splash resistance have not been validated.

Configuration UI with simulated readings:

Bill of materials · Shopping CSV · KiCad project · 26-page manual · Print files · Complete package

Esp32-ecu, from the project README
From the project README

Main components on the Esp32-ecu

Esp32-ecu bill of materials (BOM)

214 components, 74 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Pololu 3792
Pololu D36V6F5
U1
1
LD1117V33
U2
1
ESP32-S3-DevKitC-1-N8R8
ESP32-S3-DevKitC-1-N8R8 v1.1
U3
1
MAX1232EPA+
U4
1
MCP120-315DI/TO
U5
1
MCP3208-CI/P
U6
1
SN74HC14N
U7
1
MCP2562-E/P
U8
5
SN74HCT08N
U9, U10, U11, U16, U17
4
CD74HCT221E
U12, U13, U14, U15
7
VNP35N07-E
Q1, Q2, Q3, Q4, Q5, Q6, Q7
1
B2P-VH(LF)(SN)
FUSED_KEY_12V
J1
1
UART_FLASH_3V3_ONLY
J2
1
NORMALLY_OPEN_INTERLOCK
J3
1
EXPANSION_3V3
J4
1
B4B-XH-A(LF)(SN)
CAN_H_L_G_SHIELD
J7
1
B4P-VH(LF)(SN)
EXTERNAL_RELAYS
J8
1
B8P-VH(LF)(SN)
INJECTOR_LOW_SIDES
J9
1
B5P-VH(LF)(SN)
SMART_COIL_5V_LOGIC
J10
1
B3B-XH-A(LF)(SN)
MAP
J11
Show 54 more
QtyPartRefs
1
B3B-XH-A(LF)(SN)
TPS
J12
1
B3B-XH-A(LF)(SN)
CLT
J13
1
B3B-XH-A(LF)(SN)
IAT
J14
1
B3B-XH-A(LF)(SN)
LAMBDA_WB
J15
1
B3B-XH-A(LF)(SN)
POSTCAT_BUF
J16
1
B3B-XH-A(LF)(SN)
CRANK
J17
1
B3B-XH-A(LF)(SN)
CAM
J18
1
B2P-VH(LF)(SN)
POWER_RETURN
J19
1
B2P-VH(LF)(SN)
SHIELD_BOND
J20
1
MF-R010
PTC 100mA radial
F2
1
CAN_TX_ENABLE_OPEN
JP1
1
CAN_TERMINATION_OPEN
JP2
1
GND
TP1
1
VIN_PROT
TP2
1
+5V
TP3
1
+3V3
TP4
1
SAFE_N
TP5
1
RUN_5V
TP6
1
1.5KE27CA
D1
1
SB5100-B
SB5100
D2
21
BAT85,113
BAT85
D3, D100, D101, D110, D111, D120, D121, D130 +13
2
P6KE24CA
D22, D23
1
RLB0914-470KL
47uH input filter
L2
3
47u 63V
C1, C2, C45
2
100n 100V
C3, C46
2
22u 16V electrolytic
C5, C6
1
22u 10V ESR 0.3-1R
C9
17
100N
100n
C10, C14, C15, C16, C28, C32, C33, C34 +9
3
1u
C11, C12, C29
1
10U
10u
C13
8
10N
10n
C20, C21, C22, C23, C24, C25, C26, C27
2
100p C0G
C30, C31
1
4.7n 100V
C47
4
270n 5% FILM
C61, C62, C63, C64
4
68n 5% FILM
C81, C82, C83, C84
6
1n C0G 100V
C150, C151, C152, C153, C154, C155
2
100p C0G 100V
C156, C157
1
100R 0.25W
R7
31
10K
10k
R8, R9, R11, R12, R14, R15, R38, R44 +23
8
1k
R13, R48, R49, R50, R101, R102, R103, R104
2
4.7K
4.7k
R16, R17
7
22k 1%
R20, R22, R24, R26, R28, R30, R36
7
33k 1%
R21, R23, R25, R27, R29, R31, R37
2
2.49k 1% NTC
R32, R33
1
120k 1%
R34
1
10k 1%
R35
2
33K
33k
R40, R42
2
2.2k HALL PULLUP
R41, R43
1
120R
R46
8
100k 1%
R61, R62, R63, R64, R81, R82, R83, R84
4
220R
R111, R112, R113, R114
1
1R 0.5W damping
R150
1
1M
R151
2
47R
R152, R153

Esp32-ecu design files

The KiCad project lives in the markthebault/esp32-ecu repository on GitHub; these links point at the commit this page was built from.

Esp32-ecu: common questions

What microcontroller does the Esp32-ecu use?

The Esp32-ecu is built around the ESP32-S3-DevKitC-1-N8R8, from the ESP32 family.

How big is the Esp32-ecu PCB?

The Esp32-ecu measures 120 × 120 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Esp32-ecu?

214 components, from 74 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32-ecu design files?

From the markthebault/esp32-ecu repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp32-ecu design in my own project?

The repository has no license, so all rights stay with markthebault. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32-ecu without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards