HardLabs

ApiaryWaterDispensingSystem

Mateuszworo97·Projects·Embedded_projects/PCB/ApiaryWaterDispensingSystem/ApiaryWaterDispensingSystem.kicad_pcb

ApiaryWaterDispensingSystem PCB layout, top view — open source board by Mateuszworo97

About the ApiaryWaterDispensingSystem PCB

ApiaryWaterDispensingSystem is an open source PCB design by Mateuszworo97, published on GitHub. It is a 2-layer board measuring 70 × 82.5 mm, with 41 components from 19 distinct parts.

By type, the board carries 15 connectors, 12 capacitors, 10 resistors and 4 switches.

It belongs with the power & battery and sensors designs in this gallery.

From the project

The system measures time, temperature, humidity, light intensity, battery voltage, value and direction of battery current flow, power consumered and delivered to battery, Voltage of photovoltaic panel, value of photovoltaic panel. The data is shown on the display. By default, the

The system measures time, temperature, humidity, light intensity, battery voltage, value and direction of battery current flow, power consumered and delivered to battery, Voltage of photovoltaic panel, value of photovoltaic panel. The data is shown on the display. By default, the pump is turned on for 1 minute. Every hour. Using push buttons, we can increase the pump activation time from 1 to 59 minutes. Using the buttons, we can also change the time at which the alarm will turn on (pump on). The next time the alarm will turn on will be increased by the hour value displayed on the display. we…

ApiaryWaterDispensingSystem bill of materials (BOM)

41 components, 19 distinct parts.

QtyPartRefs
1
BME280
J1
1
BH1750
J2
1
OLED
J3
1
RTC
J4
1
INA219 PV
J5
1
INA219 Battery
J6
2
Conn_02x19_Odd_Even
J7, J10
1
I2C
J8
1
Conn_01x14_Male
J9
1
PUMP
J12
1
BOOST
J13
1
POWER_5V
J14
1
SD CARD
J15
1
3V3
J16
4
SW_Push
SW1, SW2, SW3, SW4
12
100n
C1, C2, C3, C4, C5, C6, C7, C8 +4
2
4k7
R1, R3
4
1k
R2, R5, R7, R9
4
10k
R4, R6, R8, R10

ApiaryWaterDispensingSystem design files

The KiCad project lives in the Mateuszworo97/Projects repository on GitHub; these links point at the commit this page was built from.

ApiaryWaterDispensingSystem: common questions

How big is the ApiaryWaterDispensingSystem PCB?

The ApiaryWaterDispensingSystem measures 70 × 82.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ApiaryWaterDispensingSystem?

41 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the ApiaryWaterDispensingSystem design files?

From the Mateuszworo97/Projects repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ApiaryWaterDispensingSystem design in my own project?

The repository has no license, so all rights stay with Mateuszworo97. Use it as a reference, and ask the author before reusing the design.

More boards in Projects

Similar boards