HardLabs

Latarka

Mateuszworo97·Projects·PCB projects/latarka/latarka.kicad_pcb

Latarka PCB layout, top view — open source board by Mateuszworo97

About the Latarka PCB

Latarka is an open source PCB design by Mateuszworo97, published on GitHub. It is a 2-layer board measuring 11 × 13.8 mm, with 9 components from 8 distinct parts.

Other key parts include the MCP1643xMS. By type, the board carries 2 connectors, 2 capacitors, 2 resistors, 1 IC, 1 diode and 1 inductor.

It belongs with the power & battery and sensors designs in this gallery.

From the project

The system measures time, temperature, humidity, light intensity, battery voltage, value and direction of battery current flow, power consumered and delivered to battery, Voltage of photovoltaic panel, value of photovoltaic panel. The data is shown on the display. By default, the

The system measures time, temperature, humidity, light intensity, battery voltage, value and direction of battery current flow, power consumered and delivered to battery, Voltage of photovoltaic panel, value of photovoltaic panel. The data is shown on the display. By default, the pump is turned on for 1 minute. Every hour. Using push buttons, we can increase the pump activation time from 1 to 59 minutes. Using the buttons, we can also change the time at which the alarm will turn on (pump on). The next time the alarm will turn on will be increased by the hour value displayed on the display. we…

Main components on the Latarka

MCP1643xMS

Latarka bill of materials (BOM)

9 components, 8 distinct parts.

QtyPartRefs
1
MCP1643xMS
U1
2
Conn_01x02
J1, J1Bateria1
1
LED_Small
D1
1
4,7u
L1
1
10u
C1
1
4,7u
C2
1
10k
R1
1
4
R2

Latarka design files

The KiCad project lives in the Mateuszworo97/Projects repository on GitHub; these links point at the commit this page was built from.

Latarka: common questions

How big is the Latarka PCB?

The Latarka measures 11 × 13.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Latarka?

9 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Latarka design files?

From the Mateuszworo97/Projects repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Latarka design in my own project?

The repository has no license, so all rights stay with Mateuszworo97. Use it as a reference, and ask the author before reusing the design.

More boards in Projects

Similar boards