PCB ApiaryWaterDispensingSystem
Mateuszworo97·Projects·Embedded_projects/PCB/Prototyp-ApiaryWDispensingSystem/PCB_ApiaryWaterDispensingSystem/PCB_ApiaryWaterDispensingSystem.kicad_pcb
About the PCB ApiaryWaterDispensingSystem
PCB ApiaryWaterDispensingSystem is an open source STM32 PCB design by Mateuszworo97, published on GitHub. It is a 2-layer board measuring 217.3 × 127.3 mm, with 182 components from 71 distinct parts.
Its main chip is the STM32F411RETx, from the STM32 family. Other key parts include the 24LC32, DS3231M, INA219AxD, BME280 and drv8835. By type, the board carries 73 resistors, 49 capacitors, 21 connectors, 12 ICs, 8 diodes and 5 switches.
It belongs with the sensors and power & battery designs in this gallery.
From the project
The system measures time, temperature, humidity, light intensity, battery voltage, value and direction of battery current flow, power consumered and delivered to battery, Voltage of photovoltaic panel, value of photovoltaic panel. The data is shown on the display. By default, the
The system measures time, temperature, humidity, light intensity, battery voltage, value and direction of battery current flow, power consumered and delivered to battery, Voltage of photovoltaic panel, value of photovoltaic panel. The data is shown on the display. By default, the pump is turned on for 1 minute. Every hour. Using push buttons, we can increase the pump activation time from 1 to 59 minutes. Using the buttons, we can also change the time at which the alarm will turn on (pump on). The next time the alarm will turn on will be increased by the hour value displayed on the display. we…
Main components on the PCB ApiaryWaterDispensingSystem
PCB ApiaryWaterDispensingSystem bill of materials (BOM)
182 components, 71 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F411RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | 24LC32 | 24LC32 | U2 |
| 1 | DS3231M | SOIC-16W_7.5x10.3mm_P1.27mm | U3 |
| 2 | INA219AxD | SOIC-8_3.9x4.9mm_P1.27mm | U4, U6 |
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U5 |
| 1 | drv8835 | WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65_ThermalVias | U7 |
| 1 | LD1117S50TR_SOT223 | SOT-223-3_TabPin2 | U8 |
| 1 | STS7PF30L | SO-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | LD3985M33R_SOT23 | SOT-23-5 | U10 |
| 1 | STM32F103CBTx | LQFP-48_7x7mm_P0.5mm | U11 |
| 1 | LD39050PU33 | WSON-6-1EP_3x3mm_P0.95mm | U12 |
| 1 | Q_PMOS_GSD | SOT-23 | Q1 |
| 1 | Q_NPN_BEC | SOT-23 | Q2 |
| 2 | Crystal | Resonator-2Pin_W8.0mm_H3.5mm | X1, Y3 |
| 1 | Crystal_GND23_Small | ABS25-32768KHZ-6-T_Abracon | Y2 |
| 7 | Conn_02x01 | PinHeader_1x02_P2.54mm_Vertical | J1, J3, J6, J11, J12, J16, J21 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 2 | Conn_02x19_Odd_Even | PinHeader_2x19_P2.54mm_Vertical | J7, J10 |
Show 51 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x05_Male | PinSocket_1x05_P1.27mm_Vertical | J8 |
| 1 | Conn_01x04_Male | PinSocket_1x04_P2.54mm_Vertical | J9 |
| 1 | Conn_01x03 | TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal | J13 |
| 2 | Conn_01x02 | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J14, J15 |
| 1 | MSD-1-A | CUI_MSD-1-A | J17 |
| 1 | Conn_01x02 | TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J18 |
| 1 | Conn_01x08 | PinSocket_1x08_P2.54mm_Vertical | J19 |
| 1 | USB_B_Micro | USB_Mini-B_Lumberg_2486_01_Horizontal | J20 |
| 2 | SW_Push_Dual | SW_SPST_Omron_B3FS-100xP | B1, B2 |
| 1 | Battery_Cell | BatteryHolder_Keystone_107_1x23mm | BT1 |
| 1 | Conn_01x02 | PinSocket_1x02_P2.54mm_Vertical | I2C1 |
| 1 | LD_BICOLOR_CMS | LD_BiCOLOR_CMS | LD1 |
| 3 | Conn_01x02 | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | POMPA_1, POMPA_2, Wejscie_zasilania_pomp1 |
| 1 | SW_Push | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW2 |
| 4 | SW_Push | SW_PUSH-12mm | SW3, SW4, SW5, SW6 |
| 3 | BAT60A | D_SOD-323 | D1, D2, D3 |
| 1 | LED | D_0805_2012Metric | D4 |
| 1 | D_Schottky 6,8 V SMAZ6V8 | D_SMA | D5 |
| 1 | D_Small | D_SMA | D6 |
| 1 | LED | D_0603_1608Metric | D7 |
| 1 | LED | LED_0805_2012Metric | D8 |
| 1 | L | L_0603_1608Metric | L1 |
| 19 | 100n | C_0603_1608Metric | C1, C4, C5, C6, C7, C11, C12, C14 +11 |
| 3 | 1uF_X5R_0603 | C_0603_1608Metric | C2, C13, C18 |
| 3 | 20pF | C_0603_1608Metric | C3, C8, C10 |
| 1 | 10nF_X7R | C_0603_1608Metric | C9 |
| 11 | 100nF | C_0603_1608Metric | C15, C19, C23, C24, C27, C28, C30, C47 +3 |
| 2 | 10uF(25V) | CP_EIA-6032-15_Kemet-U | C16, C17 |
| 1 | 1uF_X5R | C_0603_1608Metric | C21 |
| 2 | 2.2uF | C_1206_3216Metric | C22, C25 |
| 1 | 4.7uF | C_0805_2012Metric | C26 |
| 1 | 1 uF_X5R_0603 | C_0603_1608Metric | C29 |
| 4 | 4.3pF | C_0603_1608Metric | C31, C32, C33, C34 |
| 1 | 10u | C_0805_2012Metric | C45 |
| 5 | 10k | R_0603_1608Metric | R1, R2, R3, R12, R33 |
| 25 | 4k7 | R_0603_1608Metric | R4, R23, R27, R28, R30, R32, R40, R41 +17 |
| 4 | 22 | R_0603_1608Metric | R5, R8, R13, R22 |
| 4 | 100k | R_0603_1608Metric | R6, R15, R54, R71 |
| 1 | 2k7 | R_0603_1608Metric | R7 |
| 11 | 100 | R_0603_1608Metric | R9, R11, R19, R20, R21, R25, R29, R63 +3 |
| 1 | 36k | R_0603_1608Metric | R10 |
| 8 | R | R_0603_1608Metric | R14, R35, R37, R42, R44, R45, R48, R51 |
| 1 | 1k5 | R_0603_1608Metric | R16 |
| 4 | 0 | R_0603_1608Metric | R17, R18, R34, R36 |
| 1 | 100 | C_0603_1608Metric | R24 |
| 1 | [N/A] | R_0603_1608Metric | R26 |
| 2 | RP | R_0603_1608Metric | R31, R38 |
| 2 | 100 | R_2512_6332Metric | R39, R47 |
| 1 | 1 | R_0603_1608Metric | R55 |
| 1 | 510 | R_0603_1608Metric | R72 |
| 1 | R_Pack04 | R_Array_Convex_4x0603 | RN1 |
PCB ApiaryWaterDispensingSystem design files
The KiCad project lives in the Mateuszworo97/Projects repository on GitHub; these links point at the commit this page was built from.
PCB ApiaryWaterDispensingSystem: common questions
What microcontroller does the PCB ApiaryWaterDispensingSystem use?
The PCB ApiaryWaterDispensingSystem is built around the STM32F411RETx, from the STM32 family.
How big is the PCB ApiaryWaterDispensingSystem?
The PCB ApiaryWaterDispensingSystem measures 217.3 × 127.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB ApiaryWaterDispensingSystem?
182 components, from 71 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB ApiaryWaterDispensingSystem design files?
From the Mateuszworo97/Projects repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PCB ApiaryWaterDispensingSystem design in my own project?
The repository has no license, so all rights stay with Mateuszworo97. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PCB ApiaryWaterDispensingSystem without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Projects
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k