HardLabs

Rpi adapter

matthieuvigne·MiAM_robotics·Electronics/rpi_adapter/rpi_adapter/rpi_adapter.kicad_pcb

Rpi adapter PCB layout, top view — open source board by matthieuvigne
Simulate this board

About the Rpi adapter PCB

Rpi adapter is an open source PCB design by matthieuvigne, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 24 × 15 mm, with 5 components from 3 distinct parts.

It belongs with the robotics & motion designs in this gallery.

From the project

Generic repo for robotic projects with the former MiAM Eurobot team !

This repo contains information and software for robotic-related projects done with the MiAM Eurobot team.

Our robot architecture are based off an embedded linux on an ARM platform, Raspberry Pi or Beaglebone Black, programmed in C++. We also use Arduinos as slaves for low-level tasks such as motor control or sensor handling - using serial communication through USB.

Rpi adapter bill of materials (BOM)

5 components, 3 distinct parts.

QtyPartRefs
2
Conn_01x04_Male
J1, J3
1
Conn_02x05_Odd_Even
J2
2
S4B-ZR-SM4A-TF(LF)(SN)
JST_ZH5
SPI1, SPI2

Rpi adapter design files

The KiCad project lives in the matthieuvigne/MiAM_robotics repository on GitHub; these links point at the commit this page was built from.

Rpi adapter: common questions

How big is the Rpi adapter PCB?

The Rpi adapter measures 24 × 15 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rpi adapter?

5 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rpi adapter design files?

From the matthieuvigne/MiAM_robotics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rpi adapter design in my own project?

Yes, under the terms of its GPL-3.0 license, which matthieuvigne chose for the repository.

More boards in MiAM_robotics

Similar boards