HardLabs

Servo multiplexer

matthieuvigne·MiAM_robotics·Electronics/servo_multiplexer/servo_multiplexer.kicad_pcb

Servo multiplexer PCB layout, top view — open source board by matthieuvigne

About the Servo multiplexer PCB

Servo multiplexer is an open source PCB design by matthieuvigne, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 33 × 22 mm, with 9 components from 1 distinct parts.

It belongs with the robotics & motion designs in this gallery.

From the project

Generic repo for robotic projects with the former MiAM Eurobot team !

This repo contains information and software for robotic-related projects done with the MiAM Eurobot team.

Our robot architecture are based off an embedded linux on an ARM platform, Raspberry Pi or Beaglebone Black, programmed in C++. We also use Arduinos as slaves for low-level tasks such as motor control or sensor handling - using serial communication through USB.

Servo multiplexer bill of materials (BOM)

9 components, 1 distinct parts.

QtyPartRefs
9
22-03-5035
J1, J2, J3, J4, J5, J6, J7, J8 +1

Servo multiplexer design files

The KiCad project lives in the matthieuvigne/MiAM_robotics repository on GitHub; these links point at the commit this page was built from.

Servo multiplexer: common questions

How big is the Servo multiplexer PCB?

The Servo multiplexer measures 33 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Servo multiplexer?

9 components, from 1 distinct parts. The full bill of materials is listed on this page.

Where can I download the Servo multiplexer design files?

From the matthieuvigne/MiAM_robotics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Servo multiplexer design in my own project?

Yes, under the terms of its GPL-3.0 license, which matthieuvigne chose for the repository.

More boards in MiAM_robotics

Similar boards