HardLabs

I2c mosfet

matthieuvigne·MiAM_robotics·Electronics/i2c_mosfet/i2c_mosfet.kicad_pcb

I2c mosfet PCB layout, top view — open source board by matthieuvigne
Simulate this board

About the I2c mosfet PCB

I2c mosfet is an open source PCB design by matthieuvigne, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 40 × 40 mm, with 36 components from 12 distinct parts.

Other key parts include the MCP23008-xSS. By type, the board carries 10 resistors, 7 connectors, 6 transistors, 6 diodes, 3 jumpers and 3 capacitors.

It belongs with the robotics & motion designs in this gallery.

From the project

Generic repo for robotic projects with the former MiAM Eurobot team !

This repo contains information and software for robotic-related projects done with the MiAM Eurobot team.

Our robot architecture are based off an embedded linux on an ARM platform, Raspberry Pi or Beaglebone Black, programmed in C++. We also use Arduinos as slaves for low-level tasks such as motor control or sensor handling - using serial communication through USB.

Main components on the I2c mosfet

MCP23008-xSS

I2c mosfet bill of materials (BOM)

36 components, 12 distinct parts.

QtyPartRefs
1
MCP23008-xSS
U1
6
NVTR4503NT1G
Q1, Q2, Q3, Q4, Q5, Q6
2
Conn_01x02_Male
J1, J4
2
Conn_01x04_Male
J2, J3
2
1751280
J5, J6
1
Conn_02x02_Counter_Clockwise
J8
3
SolderJumper_3_Open
JP1, JP2, JP3
6
MSS2P3
D1, D2, D3, D4, D5, D6
1
100nF
C1
2
10uF
C2, C3
8
10k
R1, R2, R3, R4, R5, R6, R7, R10
2
5k
R8, R9

I2c mosfet design files

The KiCad project lives in the matthieuvigne/MiAM_robotics repository on GitHub; these links point at the commit this page was built from.

I2c mosfet: common questions

How big is the I2c mosfet PCB?

The I2c mosfet measures 40 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the I2c mosfet?

36 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the I2c mosfet design files?

From the matthieuvigne/MiAM_robotics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the I2c mosfet design in my own project?

Yes, under the terms of its GPL-3.0 license, which matthieuvigne chose for the repository.

More boards in MiAM_robotics

Similar boards