11 open source boards using the TS5A23159DGS
Real designs built with the TS5A23159DGS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Main board
esl-epfl
144.3 × 143.8 mm253 parts4LNo license11Main board
esl-epfl
144.3 × 143.8 mm259 parts4LNo license2Project-Trace
LauKH312
100 × 100 mm118 parts4LNo license1AVR/Arduino
Oscino
cristianfurtuna
120 × 80 mm119 parts4LMIT0AVR/Arduino
Slim
McbeEringi
44 × 44 mm64 parts2LMIT2AVR/Arduino
Matrix-7seg8-x02-x06
McbeEringi
95 × 100 mm51 parts2LMIT2ESP32
ESP32S3
Tert2
27.9 × 57.2 mm48 parts4LNo license0260119
McbeEringi
100 × 90 mm45 parts2LMIT2AVR/Arduino
Serial usbc dip-7seg clk
McbeEringi
100 × 100 mm42 parts2LMIT2AVR/Arduino
Tx04-mx09
McbeEringi
99.1 × 96.5 mm17 parts2LMIT2AVR/Arduino
Tx04-pdfix
McbeEringi
91.1 × 88.9 mm17 parts2LMIT2
How designs wire the TS5A23159DGS
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TS5A23159DGS connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 10 µF).
- Pin 1 has a pull-up to 3.3V on 3 of 6 designs, most often 10 kΩ.
- Pin 10 has a series resistor on 3 of 6 designs, most often 111 Ω (then 9 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: FT4232HL 33%, SN74AXC4T774RSVR 33%, TXB0304RUT 33% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| Pin 6 | Connected to: Signal 67% · not connected 33% |
|
| Pin 7 | Connected to: Signal 67% · not connected 33% |
|
| VCCpin 8 | Connected to: 5V 100% |
|
| Pin 9 | Connected to: 74AHC244 33%, another IC 33% |
|
| Pin 10 | Connected to: SN74AXC4T774RSVR 33% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Main board by esl-epfl, Main board by esl-epfl, 260119 by McbeEringi and Project-Trace by LauKH312.
The TS5A23159DGS in open source designs
The gallery holds 11 open source boards using the TS5A23159DGS from 6 GitHub repositories; a typical one measures about 100 × 96.5 mm and carries around 51 components.
55% are two-layer designs, the rest use four layers or more, and 64% carry an open source license.
The most starred is Main board by esl-epfl.
Parts used alongside the TS5A23159DGS
Microcontrollers on boards using the TS5A23159DGS
What boards using the TS5A23159DGS are built for
TS5A23159DGS: common questions
Where can I find a TS5A23159DGS reference design?
Each of the 11 boards on this page is a real design using the TS5A23159DGS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TS5A23159DGS VCC pin?
The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the TS5A23159DGS.
What pull-up resistor is used on the TS5A23159DGS pin 1?
Pin 1 has a pull-up to 3.3V on 3 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the TS5A23159DGS.
What resistor goes on the TS5A23159DGS pin 10?
Pin 10 has a series resistor on 3 of 6 designs, most often 111 Ω (then 9 kΩ). Counted from the KiCad layouts of 6 open source designs using the TS5A23159DGS.
What parts are used alongside the TS5A23159DGS?
The 24AA02E-OT, 74AHC1G04, 74AHC244, 74AHCT1G08 and BIWIN_DTS04GE_SMD appear in the most repositories here.
Which microcontrollers do boards using the TS5A23159DGS use?
Most are built on AVR/Arduino (6) and ESP32 (1).
How big is a typical board using the TS5A23159DGS?
The median is 100 × 96.5 mm, and 55% are two-layer designs.
What is the most popular open source board using the TS5A23159DGS?
By GitHub stars, Main board by esl-epfl, with 11 stars.
Can I simulate one of these boards using the TS5A23159DGS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.