Env monitoring

MdAyanAkhtarKhan·env_monitoring_pcb

Env monitoring PCB layout, top view — open source ESP32 board by MdAyanAkhtarKhan

About the Env monitoring PCB

Env monitoring is an open source ESP32 PCB design by MdAyanAkhtarKhan, published on GitHub. It is a 2-layer board measuring 140.5 × 110.5 mm, with 15 components from 12 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the MQ-6 and LM393. By type, the board carries 4 resistors, 3 ICs, 2 capacitors, 1 connector and 1 diode.

It belongs with the sensors, iot & wireless and displays & leds designs in this gallery.

From the project

This project presents a real-time environmental monitoring system designed using KiCad. The system uses an ESP32 microcontroller to monitor temperature, humidity, and gas levels in the environment. It is useful for applications like smart homes, air quality monitoring, and industrial safety systems.

This project is a PCB-based environmental monitoring system designed using KiCad. It uses an ESP32 microcontroller to monitor temperature, humidity, and gas levels in real time.

Unlike basic designs, this system includes a custom-built analog signal processing stage using LM393 comparator, instead of relying on prebuilt sensor modules.

Designed a gas detection comparator circuit using LM393 Converts analog signal from MQ sensor into digital output Adjustable threshold using potentiometer Improves flexibility and understanding of analog design

Env monitoring, from the project README
From the project README

Main components on the Env monitoring

Env monitoring bill of materials (BOM)

15 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
1
MQ-6
U2
1
LM393
U3
1
5V
J1
1
WC1602A
DS2
2
R_Potentiometer_US
RV1, RV2
1
DHT11
SENS-1
1
LED
D1
2
100N
100n
C1, C2
1
R
R1
1
2.2K
R2
2
10K
10k
R3, R4

Env monitoring design files

The KiCad project lives in the MdAyanAkhtarKhan/env_monitoring_pcb repository on GitHub; these links point at the commit this page was built from.

Env monitoring: common questions

What microcontroller does the Env monitoring use?

The Env monitoring is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the Env monitoring PCB?

The Env monitoring measures 140.5 × 110.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Env monitoring?

15 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Env monitoring design files?

From the MdAyanAkhtarKhan/env_monitoring_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Env monitoring design in my own project?

The repository has no license, so all rights stay with MdAyanAkhtarKhan. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Env monitoring without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards