EkoPuszka
media3-0·EkoPuszka·Czujniki/projekt.kicad_pcb
About the EkoPuszka PCB
EkoPuszka is an open source PIC PCB design by media3-0, published on GitHub under the MIT license. It is a 2-layer board measuring 72.4 × 45.7 mm, with 75 components from 47 distinct parts.
Its main chip is the PIC16F1703, from the PIC family. Other key parts include the MCP1700, MCP16251, MCP1825, MCP1702 and MCP3201. By type, the board carries 24 resistors, 23 capacitors, 13 ICs, 5 transformers, 3 connectors and 1 crystal.
Main components on the EkoPuszka
EkoPuszka bill of materials (BOM)
75 components, 47 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1700 | SOT23-mcp1700 | U1 |
| 1 | PIC16F1703 | SOIC-14_N | U2 |
| 1 | MCP16251 | SOT-23-6 | U3 |
| 1 | MCP1825 | SOT-223 | U4 |
| 1 | MCP1702 | SOT23-mcp1700 | U5 |
| 1 | MCP3201 | SOIC-8-N | U6 |
| 1 | DS1338 | SOIC-8-N | U7 |
| 2 | MCP6L1 | SOT-23-5 | U8, U9 |
| 1 | PCA9306 | TSSOP-8_3x3mm_Pitch0.65mm | U10 |
| 1 | SHTC1 | DFN4-2x2x0.75 | U12 |
| 1 | LM4041 | SOT-23_Handsoldering | U14 |
| 1 | MCP6231 | SOT-23-5 | U15 |
| 1 | Crystal | 91SMX-OSC | Y1 |
| 1 | CONN_01X08 | DS1065-02-1X8S8BS | P1 |
| 1 | CONN_01X06 | Socket_Strip_Straight_1x06 | P2 |
| 1 | CONN_01X05 | Socket_Strip_Straight_1x05 | P3 |
| 1 | Battery | CR2032H | BT1 |
| 1 | POLOLU-2126 | Socket_Strip_Straight_1x09 | CE1 |
| 1 | MQ-Sensor | Socket_Strip_Straight_1x06 | DET1 |
| 1 | ELECTRET | Pin_Header_Straight_1x02 | E1 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SW_PUSH_SMALL | TACT_SW_ONE_PAIR | SW1 |
| 3 | Si2323DS | SOT23 | T1, T4, T5 |
| 2 | FDV303N | SOT23 | T2, T3 |
| 1 | NLCV32T-4R7M-PF | SMD-1210_Pol | L1 |
| 7 | 1U | C_0805_HandSoldering | C1, C2, C8, C9, C10, C14, C37 |
| 1 | 220U | TantalC_SizeX_EIA-7343 | C3 |
| 1 | 10U | TantalC_SizeX_EIA-7343 | C4 |
| 2 | 4,7U | TantalC_SizeA_EIA-3216_HandSoldering | C5, C7 |
| 3 | 10U | SMD-1206_Pol | C6, C22, C29 |
| 8 | 100N | C_0603_HandSoldering | C15, C17, C19, C26, C27, C31, C33, C43 |
| 1 | 100P | C_0603_HandSoldering | C34 |
| 1 | 100 | R_0603 | R1 |
| 1 | 150 | R_0805 | R2 |
| 1 | 3M | R_0603 | R3 |
| 1 | 1M | R_0603 | R4 |
| 4 | 4,7K | R_0603 | R5, R7, R8, R9 |
| 1 | 10K | R_0603 | R6 |
| 1 | 100K | R_0603 | R10 |
| 5 | 2,2K | R_0603 | R18, R26, R27, R28, R29 |
| 2 | 47K | R_0603 | R20, R21 |
| 1 | 22 | R_0603 | R22 |
| 1 | 1K | R_0603 | R25 |
| 1 | 220K | R_0603 | R31 |
| 1 | 150K | R_0603 | R38 |
| 1 | 30K | R_0603 | R39 |
| 1 | 1 | R_0603 | R40 |
| 1 | 300 | R_0603 | R41 |
EkoPuszka design files
The KiCad project lives in the media3-0/EkoPuszka repository on GitHub; these links point at the commit this page was built from.
EkoPuszka: common questions
What microcontroller does the EkoPuszka use?
The EkoPuszka is built around the PIC16F1703, from the PIC family.
How big is the EkoPuszka PCB?
The EkoPuszka measures 72.4 × 45.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EkoPuszka?
75 components, from 47 distinct parts. The full bill of materials is listed on this page.
Where can I download the EkoPuszka design files?
From the media3-0/EkoPuszka repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the EkoPuszka design in my own project?
Yes, under the terms of its MIT license, which media3-0 chose for the repository.
Can I test firmware for the EkoPuszka without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379