7 open source boards using the MCP3201

Real designs built with the MCP3201, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the MCP3201

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP3201 connects to, and the resistors, capacitors and other passives placed on it.

  • The IN- pin is tied to GND on 6 of 7 designs.
  • The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 µF).
  • The VREF pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 4.7 nF).
  • The IN+ pin has a resistor to GND on 3 of 7 designs, most often 100 kΩ (then 2 kΩ).
VREFpin 1Connected to: 5V 57% · a signal 43%
  • Decoupling capacitor on 57% · 100 nF (3), 4.7 nF (1), 10 µF (1)
IN+pin 2Connected to: Signal 100%
  • Resistor to GND on 43% · 100 kΩ (1), 2 kΩ (1), 5.1 kΩ (1)
IN-pin 3Connected to: GND 86%
VSSpin 4Connected to: GND 86%
VDDpin 8Connected to: 5V 86%
  • Decoupling capacitor on 71% · 100 nF (6), 10 µF (2), 1 µF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Iosefka motherboard by GlobalSequence, ShoutDUINO by HWS-XMS, CarteAdaptatrice by IOGS-LEnsE-ressources and Temp humidity mikrobus by ricardomv.

The MCP3201 in open source designs

The gallery holds 7 open source boards using the MCP3201 from 7 GitHub repositories; a typical one measures about 103 × 57 mm and carries around 95 components.

71% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is Iosefka motherboard by GlobalSequence.

Microcontrollers on boards using the MCP3201

What boards using the MCP3201 are built for

MCP3201: common questions

Where can I find a MCP3201 reference design?

Each of the 7 boards on this page is a real design using the MCP3201. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MCP3201 IN- pin connected?

The IN- pin is tied to GND on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the MCP3201.

What decoupling capacitors do designs use on the MCP3201 VDD pin?

The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the MCP3201.

What decoupling capacitors do designs use on the MCP3201 VREF pin?

The VREF pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 4.7 nF). Counted from the KiCad layouts of 7 open source designs using the MCP3201.

Which microcontrollers do boards using the MCP3201 use?

Most are built on PIC (1), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the MCP3201?

The median is 103 × 57 mm, and 71% are two-layer designs.

What is the most popular open source board using the MCP3201?

By GitHub stars, Iosefka motherboard by GlobalSequence, with 5 stars.

Can I simulate one of these boards using the MCP3201 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part