HardLabs

Axis MCU V4

Meigs2·Axis·hardware/pcbs/Axis_MCU_V4/Axis_MCU_V4.kicad_pcb

Axis MCU V4 PCB layout, top view — open source RP2040/RP2350 board by Meigs2

About the Axis MCU V4 PCB

Axis MCU V4 is an open source RP2040/RP2350 PCB design by Meigs2, published on GitHub. It is a 4-layer board measuring 90 × 60 mm, with 47 components from 21 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the ADS1119IPWR, TCA9534, MAX31855EASA, PCA9544APWR and MAX6107. By type, the board carries 18 resistors, 9 connectors, 9 capacitors, 8 ICs, 2 diodes and 1 switch.

From the project

An open source espresso machine controller inspired by the Gaggiuinio Project

This project is unfinished and is under active development.

For updates, come join the discord: https://discord.gg/SSdEUZB4Xh

Main components on the Axis MCU V4

PicoADS1119IPWRTCA9534MAX31855EASAPCA9544APWRMAX6107FM24CL16BDS3231MZ

Axis MCU V4 bill of materials (BOM)

47 components, 21 distinct parts.

QtyPartRefs
1
Pico
U1
1
ADS1119IPWR
U2
1
TCA9534
U3
1
MAX31855EASA
U4
1
PCA9544APWR
U5
1
MAX6107
U7
1
FM24CL16B
U8
1
DS3231MZ
U9
1
SWD
J1
1
GPIO
J2
1
Conn_01x04
J3
1
UART
J4
1
Conn_01x02
J5
1
EXT_SPI
J7
1
EXT_I2C
J8
1
GPIO
J9
1
HV_IDC
J10
1
RES
SW1
2
4.7v
D1, D2
9
0.1u
C1, C2, C3, C4, C5, C7, C8, C9 +1
Show 1 more
QtyPartRefs
18
1k
R1, R2, R3, R4, R5, R6, R7, R8 +10

Axis MCU V4 design files

The KiCad project lives in the Meigs2/Axis repository on GitHub; these links point at the commit this page was built from.

Axis MCU V4: common questions

What microcontroller does the Axis MCU V4 use?

The Axis MCU V4 is built around the Pico, from the RP2040/RP2350 family.

How big is the Axis MCU V4 PCB?

The Axis MCU V4 measures 90 × 60 mm, has 4 copper layers and is 1.572 mm thick.

How many components are on the Axis MCU V4?

47 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Axis MCU V4 design files?

From the Meigs2/Axis repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Axis MCU V4 design in my own project?

The repository has no license, so all rights stay with Meigs2. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Axis MCU V4 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Axis

Earlier revisions in the repo: Axis_MCU_V3

Similar boards