21 open source boards using the TCA9534

Real designs built with the TCA9534, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

21 boardsClear filters|Most starred

How designs wire the TCA9534

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the TCA9534 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 12 of 15 designs, most often 100 nF (then 1 µF).
  • The A2 pin is tied to GND on 14 of 15 designs.
  • The A0 pin is tied to GND on 12 of 15 designs (3.3V on 2).
  • The A1 pin is tied to GND on 12 of 15 designs (a signal on 2).
A0pin 1Connected to: GND 80%
A1pin 2Connected to: GND 80%
A2pin 3Connected to: GND 93%
P0pin 4Connected to: A connector 20%
  • Pull-up to 3.3V on 33% · 10 kΩ (4), 100 kΩ (1)
P1pin 5Connected to: A connector 20%
  • Pull-up to 3.3V on 33% · 10 kΩ (4), 100 kΩ (1)
GNDpin 8Connected to: GND 100%
P4pin 9Connected to: A connector 20% · not connected 20%
  • Pull-up to 3.3V on 40% · 10 kΩ (5), 100 kΩ (1)
P5pin 10Connected to: A connector 20%
  • Pull-up to 3.3V on 40% · 10 kΩ (5), 100 kΩ (1)
P7pin 12Connected to: Not connected 60% · a signal 40%
INTpin 13Connected to: The microcontroller 40% · not connected 27%
  • Pull-up to 3.3V on 40% · 10 kΩ (4), 1 kΩ (1), 4.7 kΩ (1)
SCLpin 14Connected to: The microcontroller 53%, a connector 40%
  • Pull-up to 3.3V on 60% · 10 kΩ (3), 4.7 kΩ (2), 1 kΩ (1)
SDApin 15Connected to: The microcontroller 47%, a connector 40%
  • Pull-up to 3.3V on 53% · 10 kΩ (2), 4.7 kΩ (2), 1 kΩ (1)
VDDpin 16Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (13), 1 µF (2)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ZC95 MKII by CrashOverride85, Power board by FOSDEM, Oniondao badge by OnionDAO-git and IcE1usb RS422 extension by osmocom.

The TCA9534 in open source designs

The gallery holds 21 open source boards using the TCA9534 from 15 GitHub repositories; a typical one measures about 90 × 60 mm and carries around 107 components.

76% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is ZC95 MKII by CrashOverride85.

Microcontrollers on boards using the TCA9534

TCA9534: common questions

Where can I find a TCA9534 reference design?

Each of the 21 boards on this page is a real design using the TCA9534. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TCA9534 VDD pin?

The VDD pin has a decoupling capacitor on 12 of 15 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 15 open source designs using the TCA9534.

How is the TCA9534 A2 pin connected?

The A2 pin is tied to GND on 14 of 15 designs. Counted from the KiCad layouts of 15 open source designs using the TCA9534.

How is the TCA9534 A0 pin connected?

The A0 pin is tied to GND on 12 of 15 designs (3.3V on 2). Counted from the KiCad layouts of 15 open source designs using the TCA9534.

What parts are used alongside the TCA9534?

The CH340C, MCP73831-2-MC, ME6211C33M5, ATECC608B-SSHDA and CC1101RGP appear in the most repositories here.

Which microcontrollers do boards using the TCA9534 use?

Most are built on ESP32 (6), RP2040/RP2350 (5) and AVR/Arduino (1).

How big is a typical board using the TCA9534?

The median is 90 × 60 mm, and 76% are two-layer designs.

What is the most popular open source board using the TCA9534?

By GitHub stars, ZC95 MKII by CrashOverride85, with 115 stars.

Can I simulate one of these boards using the TCA9534 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part