11 open source boards using the FM24CL16B
Real designs built with the FM24CL16B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Axis V2
Meigs2
120 × 60 mm49 parts2LNo license8STM32
Controller
candykingdom
150 × 68 mm190 parts2LNo license5STM32
Sdrac electronics
X-Lemon-X
81 × 51 mm142 parts4LNo license0ESP32
IoT Logger B
WestianPKl
94.7 × 71.8 mm135 parts2LNo license0ESP32
IoT Logger B
WestianPKl
94.7 × 71.8 mm135 parts2LNo license0STM32
Template board
Wust-Sat
90.2 × 95.9 mm117 parts4LMIT0RP2040/RP2350
Axis GCP Hat Rev1
Meigs2
90 × 60 mm47 parts4LNo license8ESP32
IoT Logger C
WestianPKl
94.7 × 71.8 mm97 parts2LNo license0RP2040/RP2350
Axis MCU V4
Meigs2
90 × 60 mm47 parts4LNo license8RP2040/RP2350
Axis Base Rev01
Meigs2
71.2 × 51.6 mm23 parts4LNo license8ESP32
IoT Logger C
WestianPKl
94.7 × 71.8 mm97 parts2LNo license0
How designs wire the FM24CL16B
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the FM24CL16B connects to, and the resistors, capacitors and other passives placed on it.
- The SDA pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 1 kΩ).
- The SCL pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 1 kΩ).
- The VDD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
- The VCAP pin is left unconnected on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCAPpin 1 | Connected to: Not connected 67% · a signal 33% | — |
| GNDpin 2 | Connected to: Not connected 67% · GND 17% · a signal 17% | — |
| ENpin 3 | Connected to: Not connected 67% · a signal 33% |
|
| VSSpin 4 | Connected to: GND 83% · 5V 17% | — |
| SDApin 5 | Connected to: The microcontroller 83%, MCP7940N-xSN 33%, PCA9306DCUR 33% |
|
| SCLpin 6 | Connected to: The microcontroller 83%, MCP7940N-xSN 33%, PCA9306DCUR 33% · 5V 17% |
|
| WPpin 7 | Connected to: GND 60% · not connected 20% · a signal 20% | — |
| VDDpin 8 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Axis Base Rev01 by Meigs2, Controller by candykingdom, IoT Logger B by WestianPKl and IoT Logger B by WestianPKl.
The FM24CL16B in open source designs
The gallery holds 11 open source boards using the FM24CL16B from 6 GitHub repositories; a typical one measures about 94.7 × 68 mm and carries around 97 components.
55% are two-layer designs, the rest use four layers or more, and 9% carry an open source license.
The most starred is Axis V2 by Meigs2.
Parts used alongside the FM24CL16B
Microcontrollers on boards using the FM24CL16B
What boards using the FM24CL16B are built for
FM24CL16B: common questions
Where can I find a FM24CL16B reference design?
Each of the 11 boards on this page is a real design using the FM24CL16B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the FM24CL16B SDA pin?
The SDA pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 1 kΩ). Counted from the KiCad layouts of 6 open source designs using the FM24CL16B.
What pull-up resistor is used on the FM24CL16B SCL pin?
The SCL pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 1 kΩ). Counted from the KiCad layouts of 6 open source designs using the FM24CL16B.
What decoupling capacitors do designs use on the FM24CL16B VDD pin?
The VDD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the FM24CL16B.
What parts are used alongside the FM24CL16B?
The AP63200WU, ATmega328PB-A, AZ1117-3.3, ESP32-C6-WROOM-1U and MCP7940N-xSN appear in the most repositories here.
Which microcontrollers do boards using the FM24CL16B use?
Most are built on ESP32 (4), RP2040/RP2350 (4) and STM32 (3).
How big is a typical board using the FM24CL16B?
The median is 94.7 × 68 mm, and 55% are two-layer designs.
What is the most popular open source board using the FM24CL16B?
By GitHub stars, Axis V2 by Meigs2, with 8 stars.
Can I simulate one of these boards using the FM24CL16B before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.