Lampu v1
About the Lampu v1 PCB
Lampu v1 is an open source ESP8266 PCB design by mekatronik-achmadi, published on GitHub. It is a 2-layer board measuring 77 × 86 mm, with 27 components from 20 distinct parts.
Its main chip is the ZC563900 NodeMCU ESP12, from the ESP8266 family. Other key parts include the L7805 and L7812. By type, the board carries 15 connectors, 4 capacitors, 3 ICs, 2 diodes, 2 resistors and 1 jumper.
Main components on the Lampu v1
Lampu v1 bill of materials (BOM)
27 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | TO-220F-3_Vertical | U2 |
| 1 | L7812 | TO-220F-3_Vertical | U3 |
| 1 | ZC563900 NodeMCU ESP12 | MODULE_ZC563900 | U4 |
| 2 | Conn_01x15_Pin | PinHeader_1x15_P2.54mm_Vertical | J1, J2 |
| 2 | Conn_01x15_Socket | PinSocket_1x15_P2.54mm_Vertical | J3, J4 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J7 |
| 1 | PSU | TerminalBlock_Altech_AK300-2_P5.00mm | J8 |
| 1 | FAN | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | FET | TerminalBlock_Altech_AK300-2_P5.00mm | J10 |
| 1 | 3V3 | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | 5V | PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | GND | PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | OUT1 | TerminalBlock_Altech_AK300-2_P5.00mm | J14 |
| 1 | OUT2 | TerminalBlock_Altech_AK300-2_P5.00mm | J15 |
| 1 | OUT3 | TerminalBlock_Altech_AK300-2_P5.00mm | J16 |
| 1 | OUT4 | TerminalBlock_Altech_AK300-2_P5.00mm | J17 |
| 1 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 2 | PINK | LED_D3.0mm | D1, D2 |
| 4 | 100uF | CP_Radial_D5.0mm_P2.50mm | C1, C2, C3, C4 |
| 2 | 560 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
Lampu v1 design files
The KiCad project lives in the mekatronik-achmadi/short-jobs repository on GitHub; these links point at the commit this page was built from.
Lampu v1: common questions
What microcontroller does the Lampu v1 use?
The Lampu v1 is built around the ZC563900 NodeMCU ESP12, from the ESP8266 family.
How big is the Lampu v1 PCB?
The Lampu v1 measures 77 × 86 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lampu v1?
27 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lampu v1 design files?
From the mekatronik-achmadi/short-jobs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lampu v1 design in my own project?
The repository has no license, so all rights stay with mekatronik-achmadi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Lampu v1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in short-jobs
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398