Durra NoteBook HW
About the Durra NoteBook HW PCB
Durra NoteBook HW is an open source ESP32 PCB design by meshalalhazmi, published on GitHub. It is a 4-layer board measuring 57.3 × 62.8 mm, with 54 components from 27 distinct parts.
Its main chip is the ESP32-S3-MINI-1-N8, from the ESP32 family. Other key parts include the D3V3XA4B10LP, TLV75801PDRV, MAX98357A and TPD6E004RSER. By type, the board carries 23 resistors, 13 capacitors, 5 ICs, 5 connectors, 2 diodes and 2 inductors.
From the project
Hardware design for Durra's NoteBook (KiCad 10)
Main components on the Durra NoteBook HW
Durra NoteBook HW bill of materials (BOM)
54 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-MINI-1-N8 | XCVR_ESP32-S3-MINI-1-N8 | U1 |
| 1 | D3V3XA4B10LP | Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U2 |
| 1 | TLV75801PDRV | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U3 |
| 1 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U5 |
| 1 | TPD6E004RSER | IC_TPD6E004RSER | U6 |
| 2 | ~ | PinHeader_1x22_P2.54mm_Vertical | J1, J3 |
| 1 | S2B-PH-SM4-TB | CONN_S2B-PH-SM4-TB_JST | J2 |
| 1 | Micro_SD_Card_Det2 | microSD_HC_Hirose_DM3D-SF | J4 |
| 1 | Conn_01x08_Pin | Cart_edge_8 | J5 |
| 2 | ~ | SW_SPST_PTS810 | BOOT1, RESET1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | JUSB1 |
| 1 | SPH0645LM4H-B | MIC_SPH0645LM4H-B | MK1 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | LED | LED_0603_1608Metric | D2 |
| 2 | MMZ1608B121CTAH0 | IND_1608_TDK | L1, L2 |
| 5 | 0.1uF | C_0603_1608Metric | C1, C2, C4, C5, C12 |
| 5 | 10uF | C_0603_1608Metric | C3, C7, C8, C9, C14 |
| 2 | 220pF | C_0603_1608Metric | C10, C11 |
| 1 | 200pF | C_0603_1608Metric | C13 |
| 1 | 620K | R_0603_1608Metric | R1 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 5.1K | R_0603_1608Metric | R2, R3, R9 |
| 9 | 10K | R_0603_1608Metric | R4, R14, R19, R20, R21, R22, R23, R24 +1 |
| 1 | 200K | R_0603_1608Metric | R7 |
| 1 | 1M | R_0603_1608Metric | R8 |
| 1 | 100K | R_0603_1608Metric | R10 |
| 3 | 51 | R_0603_1608Metric | R11, R12, R13 |
| 4 | 33 | R_0603_1608Metric | R15, R16, R17, R18 |
Durra NoteBook HW design files
The KiCad project lives in the meshalalhazmi/Durra_NoteBook_HW repository on GitHub; these links point at the commit this page was built from.
Durra NoteBook HW: common questions
What microcontroller does the Durra NoteBook HW use?
The Durra NoteBook HW is built around the ESP32-S3-MINI-1-N8, from the ESP32 family.
How big is the Durra NoteBook HW PCB?
The Durra NoteBook HW measures 57.3 × 62.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Durra NoteBook HW?
54 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Durra NoteBook HW design files?
From the meshalalhazmi/Durra_NoteBook_HW repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Durra NoteBook HW design in my own project?
The repository has no license, so all rights stay with meshalalhazmi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Durra NoteBook HW without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k