Mycelium pcb radio
About the Mycelium pcb radio
Mycelium pcb radio is an open source PCB design by microresearch, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 74.5 × 83.7 mm, with 62 components from 41 distinct parts.
Other key parts include the MCP602, HEF4093B and 74HC04. By type, the board carries 19 resistors, 16 capacitors, 13 connectors, 5 jumpers, 3 ICs and 2 transistors.
It belongs with the rf & radio designs in this gallery.
Main components on the Mycelium pcb radio
Mycelium pcb radio bill of materials (BOM)
62 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP602 | SOIC-8-N | U3 |
| 1 | HEF4093B | SOIC-14_3.9x8.7mm_Pitch1.27mm | U4 |
| 1 | 74HC04 | SOIC-14_N | U5 |
| 1 | BC547 | SOT-23_Handsoldering | Q1 |
| 1 | Q_PMOS_GSD | SOT-23_Handsoldering | Q2 |
| 1 | BREAKOUT | SolderWirePad_single_SMD_5x10mm | J3 |
| 2 | CAP | SolderWirePad_single_1mmDrill | J5, J6 |
| 1 | coil | SolderWirePad_single_1mmDrill | J9 |
| 1 | CONN_01X01 | SolderWirePad_single_1mmDrill | J18 |
| 7 | EDGE | SolderWirePad_single_SMD_5x10mm | J19, J20, J21, J23, J27, J28, J29 |
| 1 | ANTENNA | SolderWirePad_single_1mmDrill | J24 |
| 4 | J | R_0805_HandSoldering | JP1, JP2, JP3, JP4 |
| 1 | Jumper_NO_Small | R_0805_HandSoldering | JP5 |
| 1 | 10K | Potentiometer_Trimmer-23Breichelt_larger | RV1 |
| 1 | 2.5K | Potentiometer_Trimmer-23Breichelt | RV2 |
| 1 | 10K | Potentiometer_Trimmer-23Breichelt | RV3 |
| 1 | COIL | INDUCTOR_V | L1 |
| 1 | 10nF | C_0805_HandSoldering | C1 |
| 1 | 1uF | CP_Tantalum_Case-A_EIA-3216-18_Hand | C2 |
| 1 | 1nF | C_0805_HandSoldering | C3 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10pF-50pF | C_Trimmer_Murata_TZC3 | C4 |
| 1 | 10pf or replace conns | C_0805 | C10 |
| 1 | 100nF | C_0805 | C12 |
| 2 | 100pF | C_0805 | C13, C14 |
| 1 | 4.7nF | C_0805 | C16 |
| 1 | 1nF | C_0805 | C17 |
| 1 | 330nF | C_0805 | C18 |
| 1 | 10uF | CP_Tantalum_Case-A_EIA-3216-18_Hand | C19 |
| 2 | 33pF | C_0805_HandSoldering | C20, C21 |
| 1 | 100nF | C_0805_HandSoldering | C22 |
| 1 | 10pF | C_0805_HandSoldering | C23 |
| 2 | 100K | R_0805_HandSoldering | R2, R3 |
| 7 | 10K | R_0805_HandSoldering | R5, R7, R10, R11, R12, R13, R14 |
| 1 | 27K | R_0805_HandSoldering | R6 |
| 1 | 470R | R_0805_HandSoldering | R8 |
| 1 | 15K | R_0805_HandSoldering | R9 |
| 1 | 1k5 | R_0805_HandSoldering | R16 |
| 1 | 6.8K | R_0805_HandSoldering | R17 |
| 2 | 4.7K | R_0805_HandSoldering | R18, R20 |
| 1 | 47K | R_0805_HandSoldering | R19 |
| 2 | 1K | R_0805_HandSoldering | R21, R22 |
Mycelium pcb radio design files
The KiCad project lives in the microresearch/mycelium repository on GitHub; these links point at the commit this page was built from.
Mycelium pcb radio: common questions
How big is the Mycelium pcb radio?
The Mycelium pcb radio measures 74.5 × 83.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mycelium pcb radio?
62 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mycelium pcb radio design files?
From the microresearch/mycelium repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Mycelium pcb radio design in my own project?
Yes, under the terms of its GPL-3.0 license, which microresearch chose for the repository.
More boards in mycelium
AVR/ArduinoMycleium pcb before thereminchange
74.5 × 83.7 mm126 parts2LGPL-3.05
AVR/ArduinoMycelium
74.5 × 83.7 mm126 parts2LGPL-3.05
Earthboot
49.7 × 130.1 mm44 parts2LGPL-3.05
Earthboot withnewsoldermask
49.7 × 130.1 mm42 parts2LGPL-3.05
Mycelium pcb sensor
74.5 × 83.7 mm38 parts2LGPL-3.05
AVR/ArduinoMycelium pcb micro
74.5 × 83.7 mm28 parts2LGPL-3.05
Small mycelium
38.8 × 38.8 mm10 parts2LGPL-3.05
Small mycelium onesided
38.8 × 38.8 mm10 parts2LGPL-3.05
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372