Mycleium pcb before thereminchange
About the Mycleium pcb before thereminchange
Mycleium pcb before thereminchange is an open source AVR/Arduino PCB design by microresearch, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 74.5 × 83.7 mm, with 126 components from 64 distinct parts.
Its main chip is the ATMEGA168A-AU, from the AVR/Arduino family. Other key parts include the LM1117-3.3, MCP602, HEF4093B, 74HC04 and OP07. By type, the board carries 40 connectors, 33 capacitors, 31 resistors, 7 ICs, 5 jumpers and 2 transistors.
Main components on the Mycleium pcb before thereminchange
Mycleium pcb before thereminchange bill of materials (BOM)
126 components, 64 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA168A-AU | TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | LM1117-3.3 | TO-263-2 | U2 |
| 1 | MCP602 | SOIC-8-N | U3 |
| 1 | HEF4093B | SOIC-14_3.9x8.7mm_Pitch1.27mm | U4 |
| 1 | 74HC04 | SOIC-14_N | U5 |
| 1 | OP07 | SOIC-8-N | U6 |
| 1 | LMC555xM | SOIC-8-N | U7 |
| 1 | HIH6131 | SOIC-8-N | M1 |
| 1 | BC547 | SOT-23_Handsoldering | Q1 |
| 1 | Q_PMOS_GSD | SOT-23_Handsoldering | Q2 |
| 1 | 16 MHz | Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | BREAKOUT | SolderWirePad_single_1mmDrill | J1 |
| 2 | Conn_01x08 | Socket_Strip_Straight_1x08_Pitch2.54mm | J2, J10 |
| 16 | BREAKOUT | SolderWirePad_single_SMD_5x10mm | J3, J4, J11, J12, J13, J14, J15, J16 +8 |
| 2 | CAP | SolderWirePad_single_1mmDrill | J5, J6 |
| 1 | CONN_01X06 | Socket_Strip_Straight_1x06_Pitch2.54mm | J7 |
| 1 | Micro_SD_Card | microSD_Card_Receptacle_Wurth_693072010801 | J8 |
| 1 | C | SolderWirePad_single_1mmDrill | J9 |
| 1 | CONN_01X01 | SolderWirePad_single_1mmDrill | J18 |
| 10 | EDGE | SolderWirePad_single_SMD_5x10mm | J19, J20, J21, J23, J27, J28, J29, J39 +2 |
Show 44 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02 | Socket_Strip_Straight_1x02_Pitch2.54mm | J22 |
| 1 | ANTENNA | SolderWirePad_single_1mmDrill | J24 |
| 1 | RFIN | SolderWirePad_single_1mmDrill | J30 |
| 2 | MUSH | SolderWirePad_single_1mmDrill | J31, J32 |
| 4 | J | R_0805_HandSoldering | JP1, JP2, JP3, JP4 |
| 1 | Jumper_NO_Small | R_0805_HandSoldering | JP5 |
| 1 | 10K | Potentiometer_Trimmer-23Breichelt_larger | RV1 |
| 1 | 2.5K | Potentiometer_Trimmer-23Breichelt | RV2 |
| 1 | 10K | Potentiometer_Trimmer-23Breichelt | RV3 |
| 1 | LED_Small | LED_0805_HandSoldering | D1 |
| 1 | COIL | INDUCTOR_V | L1 |
| 1 | blocking | D_0603 | L2 |
| 2 | 10nF | C_0805_HandSoldering | C1, C27 |
| 1 | 1uF | CP_Tantalum_Case-A_EIA-3216-18_Hand | C2 |
| 1 | 1nF | C_0805_HandSoldering | C3 |
| 1 | 10pF-50pF | C_Trimmer_Murata_TZC3 | C4 |
| 8 | 100nF | C_0805_HandSoldering | C5, C6, C7, C22, C26, C28, C31, C33 |
| 3 | 10uF | CP_Tantalum_Case-A_EIA-3216-18_Hand | C8, C9, C19 |
| 1 | 10pf or replace conns | C_0805 | C10 |
| 2 | 100nF | C_0805 | C11, C12 |
| 2 | 100pF | C_0805 | C13, C14 |
| 1 | 10nF | C_0805 | C16 |
| 1 | 1nF | C_0805 | C17 |
| 1 | 330nF | C_0805 | C18 |
| 2 | 33pF | C_0805_HandSoldering | C20, C21 |
| 1 | 10pF | C_0805_HandSoldering | C23 |
| 2 | 22pF | C_0805_HandSoldering | C24, C25 |
| 3 | 2.2uF | CP_Tantalum_Case-A_EIA-3216-18_Hand | C29, C30, C32 |
| 1 | 220nF | C_0805_HandSoldering | C34 |
| 1 | 68R | R_0805_HandSoldering | R1 |
| 3 | 100K | R_0805_HandSoldering | R2, R3, R27 |
| 13 | 10K | R_0805_HandSoldering | R4, R5, R7, R10, R11, R12, R13, R14 +5 |
| 1 | 27K | R_0805_HandSoldering | R6 |
| 1 | 470R | R_0805_HandSoldering | R8 |
| 1 | 15K | R_0805_HandSoldering | R9 |
| 1 | 1k5 | R_0805_HandSoldering | R16 |
| 1 | 6.8K | R_0805_HandSoldering | R17 |
| 2 | 4.7K | R_0805_HandSoldering | R18, R20 |
| 1 | 47K | R_0805_HandSoldering | R19 |
| 2 | 1K | R_0805_HandSoldering | R21, R22 |
| 1 | 330R | R_0805_HandSoldering | R23 |
| 1 | 100R | R_0805_HandSoldering | R26 |
| 1 | 390R | R_0805_HandSoldering | R28 |
| 1 | 150K | R_0805_HandSoldering | R29 |
Mycleium pcb before thereminchange design files
The KiCad project lives in the microresearch/mycelium repository on GitHub; these links point at the commit this page was built from.
Mycleium pcb before thereminchange: common questions
What microcontroller does the Mycleium pcb before thereminchange use?
The Mycleium pcb before thereminchange is built around the ATMEGA168A-AU, from the AVR/Arduino family.
How big is the Mycleium pcb before thereminchange?
The Mycleium pcb before thereminchange measures 74.5 × 83.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mycleium pcb before thereminchange?
126 components, from 64 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mycleium pcb before thereminchange design files?
From the microresearch/mycelium repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Mycleium pcb before thereminchange design in my own project?
Yes, under the terms of its GPL-3.0 license, which microresearch chose for the repository.
Can I test firmware for the Mycleium pcb before thereminchange without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in mycelium
AVR/ArduinoMycelium
74.5 × 83.7 mm126 parts2LGPL-3.05
Mycelium pcb radio
74.5 × 83.7 mm62 parts2LGPL-3.05
Earthboot
49.7 × 130.1 mm44 parts2LGPL-3.05
Earthboot withnewsoldermask
49.7 × 130.1 mm42 parts2LGPL-3.05
Mycelium pcb sensor
74.5 × 83.7 mm38 parts2LGPL-3.05
AVR/ArduinoMycelium pcb micro
74.5 × 83.7 mm28 parts2LGPL-3.05
Small mycelium
38.8 × 38.8 mm10 parts2LGPL-3.05
Small mycelium onesided
38.8 × 38.8 mm10 parts2LGPL-3.05
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746