Copperpath macropad
miguel-sergio·copperpath-macropad
About the Copperpath macropad PCB
Copperpath macropad is an open source RP2040/RP2350 PCB design by miguel-sergio, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 87 × 68 mm, with 66 components from 24 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the SN74AHCT1G125DBVR, W25Q16JVUXIQ, AMS1117-3.3 and USBLC6-2SC6. By type, the board carries 28 capacitors, 11 switches, 9 diodes, 8 resistors, 5 ICs and 2 connectors.
It belongs with the keyboards designs in this gallery.
From the project
Open source RP2040 macropad in KiCad: 9 hot-swap keys, rotary encoder, RGB LEDs and USB-C, ready for JLCPCB assembly
A 9-key macropad with a rotary encoder and RGB lighting under every key, built around the RP2040.
I made it as an open project, so anyone can learn from it, change it or build one. The repo has the full KiCad project, the files to order it assembled at JLCPCB, and the notes behind the main design decisions.
- RP2040 with 2 MB QSPI flash (W25Q16JV) - 9 MX hot-swap keys (change switches without soldering) - EC11 rotary encoder with push button - One SK6812MINI-E RGB LED under every key - USB-C (USB 2.0 Full Speed) with ESD protection and a 500 mA polyfuse - BOOT and RESET buttons to load…

Main components on the Copperpath macropad
Copperpath macropad bill of materials (BOM)
66 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74AHCT1G125DBVR | SOT-23-5 | U1 |
| 1 | W25Q16JVUXIQ | Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U5 |
| 1 | 12MHZ 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | C160389 SWD | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J2 |
| 1 | EC11E18244A5 | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | ENC1 |
| 1 | 500MA 500mA | Fuse_0805_2012Metric | F1 |
| 1 | C318884 BOOTSEL | SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | C318884 RESET | SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 9 | CPG151101S11-16 | SW_Hotswap_Kailh_MX_1.00u | SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10 +1 |
| 9 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 21 | 100NF 100nF | C_0402_1005Metric | C1, C3, C4, C6, C8, C9, C11, C12 +13 |
| 1 | 10UF 10uF | C_0603_1608Metric | C2 |
| 2 | 22UF 22uF | C_0805_2012Metric | C5, C7 |
| 2 | 33PF 33pF | C_0402_1005Metric | C10, C14 |
| 2 | 1UF 1uF | C_0402_1005Metric | C21, C25 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 330 | R_0402_1005Metric | R3 |
| 2 | 27 | R_0402_1005Metric | R4, R5 |
| 2 | 1k | R_0402_1005Metric | R6, R7 |
| 1 | 10K 10k | R_0402_1005Metric | R8 |
Copperpath macropad design files
The KiCad project lives in the miguel-sergio/copperpath-macropad repository on GitHub; these links point at the commit this page was built from.
- Layoutmacropad.kicad_pcb
- Schematicmacropad.kicad_sch
- BOMproduction/bom.csv
Copperpath macropad: common questions
What microcontroller does the Copperpath macropad use?
The Copperpath macropad is built around the RP2040, from the RP2040/RP2350 family.
How big is the Copperpath macropad PCB?
The Copperpath macropad measures 87 × 68 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Copperpath macropad?
66 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Copperpath macropad design files?
From the miguel-sergio/copperpath-macropad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Copperpath macropad design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which miguel-sergio chose for the repository.
Can I test firmware for the Copperpath macropad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k