Optical rx brk7310 v0 1
About the Optical rx brk7310 v0 1 PCB
Optical rx brk7310 v0 1 is an open source PCB design by miniscope, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 100 × 65 mm, with 13 components from 5 distinct parts.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Miniscope Zero hardware and software
Repository for Miniscope Zero: a fully wireless, single-cell-resolution miniature microscope for imaging neural dynamics in freely behaving animals.
Miniscope Zero is a miniature one-photon microscope that operates without tethers: power is delivered via quasistatic cavity resonance (QSCR) wireless power transfer, and imaging data is streamed over a high-bandwidth optical link. This repository hosts the project-specific hardware designs — the miniscope, the optical data acquisition hardware, and the QSCR arena — and points to the related software and hardware repositories.
Optical rx brk7310 v0 1 bill of materials (BOM)
13 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | BTE-040-01-F-D-A | SAMTEC_BTE-040-01-F-D-A | J1, J2 |
| 1 | RF2-04A-T-00-50-G Conn_Coaxial | SMA_Amphenol_901-144_Vertical | J3 |
| 4 | Conn_Coaxial | SMA_Amphenol_901-144_Vertical | J4, J5, J6, J7 |
| 1 | CONN_01X06_PIN Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J8 |
| 5 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J9, J10, J11, J12, J13 |
Optical rx brk7310 v0 1 design files
The KiCad project lives in the miniscope/MiniscopeZero repository on GitHub; these links point at the commit this page was built from.
Optical rx brk7310 v0 1: common questions
How big is the Optical rx brk7310 v0 1 PCB?
The Optical rx brk7310 v0 1 measures 100 × 65 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Optical rx brk7310 v0 1?
13 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Optical rx brk7310 v0 1 design files?
From the miniscope/MiniscopeZero repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Optical rx brk7310 v0 1 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which miniscope chose for the repository.
More boards in MiniscopeZero
Optical daq vga v0 4 1
80 × 70 mm84 parts4LCERN-OHL-S-2.02
Optical daq digitizer v0 4 1
60 × 70 mm83 parts4LCERN-OHL-S-2.02
Microchip SAMWLMS-v0 2 1-motherboard
14 × 9.2 mm80 parts8LCERN-OHL-S-2.02
Microchip SAMWLMS-v0 2 1-motherboard panel
48 × 37.5 mm80 parts8LCERN-OHL-S-2.02
WLMS-v0 2 9 daughterboard
27.3 × 31.8 mm43 parts4LCERN-OHL-S-2.02
Timer usb board v0 2
40 × 40 mm29 parts4LCERN-OHL-S-2.02
Rect 20 20
20 × 20 mm6 parts6LCERN-OHL-S-2.02
Rect 24-5 16
16 × 24.5 mm6 parts6LCERN-OHL-S-2.02
C mount
370 × 146.7 mm6 parts2LCERN-OHL-S-2.02
Rect 22 18
18 × 22 mm6 parts6LCERN-OHL-S-2.02
Similar boards
Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Sram dev board
Wren6991
50 × 50 mm12 parts2LNo license508
ESP32
Chrismettal
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446