Timer usb board v0 2
About the Timer usb board v0 2
Timer usb board v0 2 is an open source PCB design by miniscope, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 40 × 40 mm, with 29 components from 20 distinct parts.
Other key parts include the SN74LV1T86DCKRG4, FT232RL and LMC555XM. By type, the board carries 9 capacitors, 6 resistors, 5 connectors, 5 diodes, 3 ICs and 1 fuse.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Miniscope Zero hardware and software
Repository for Miniscope Zero: a fully wireless, single-cell-resolution miniature microscope for imaging neural dynamics in freely behaving animals.
Miniscope Zero is a miniature one-photon microscope that operates without tethers: power is delivered via quasistatic cavity resonance (QSCR) wireless power transfer, and imaging data is streamed over a high-bandwidth optical link. This repository hosts the project-specific hardware designs — the miniscope, the optical data acquisition hardware, and the QSCR arena — and points to the related software and hardware repositories.
Main components on the Timer usb board v0 2
Timer usb board v0 2 bill of materials (BOM)
29 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74LV1T86DCKRG4 | SOT65P210X110-5N | IC1 |
| 1 | FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | LMC555XM LMC555xM | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118194-0001LF_Horizontal | J1 |
| 3 | Conn_Coaxial | SMA_Amphenol_901-143_Horizontal | J4, J5, J7 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Polyfuse | Fuse_1206_3216Metric | F1 |
| 1 | LED_GREEN | LED_0603_1608Metric | D1 |
| 1 | LED_RED | LED_0603_1608Metric | D2 |
| 3 | ESD9B5.0ST5G | D_SOD-923 | D3, D4, D5 |
| 5 | 0.1U 0.1u | C_0603_1608Metric | C1, C3, C4, C7, C9 |
| 1 | 10U 10u | CP_EIA-1608-08_AVX-J | C2 |
| 1 | 10U 10u | C_0603_1608Metric | C5 |
| 1 | 10U 10u | CP_Elec_4x5.4 | C6 |
| 1 | C_osc | C_0603_1608Metric | C8 |
| 2 | 470 | R_0603_1608Metric | R1, R2 |
| 1 | 2k | R_0603_1608Metric | R3 |
| 1 | 4.7K 4.7k | R_0603_1608Metric | R4 |
| 1 | 1k | R_0603_1608Metric | R5 |
| 1 | R_osc | R_0603_1608Metric | R6 |
Timer usb board v0 2 design files
The KiCad project lives in the miniscope/MiniscopeZero repository on GitHub; these links point at the commit this page was built from.
Timer usb board v0 2: common questions
How big is the Timer usb board v0 2?
The Timer usb board v0 2 measures 40 × 40 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Timer usb board v0 2?
29 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Timer usb board v0 2 design files?
From the miniscope/MiniscopeZero repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Timer usb board v0 2 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which miniscope chose for the repository.
More boards in MiniscopeZero
Optical daq vga v0 4 1
80 × 70 mm84 parts4LCERN-OHL-S-2.02
Optical daq digitizer v0 4 1
60 × 70 mm83 parts4LCERN-OHL-S-2.02
Microchip SAMWLMS-v0 2 1-motherboard panel
48 × 37.5 mm80 parts8LCERN-OHL-S-2.02
Microchip SAMWLMS-v0 2 1-motherboard
14 × 9.2 mm80 parts8LCERN-OHL-S-2.02
WLMS-v0 2 9 daughterboard
27.3 × 31.8 mm43 parts4LCERN-OHL-S-2.02
Optical rx brk7310 v0 1
100 × 65 mm13 parts4LCERN-OHL-S-2.02
C mount
370 × 146.7 mm6 parts2LCERN-OHL-S-2.02
Rect 24-5 16
16 × 24.5 mm6 parts6LCERN-OHL-S-2.02
Rect 20 20
20 × 20 mm6 parts6LCERN-OHL-S-2.02
Rect 22 18
18 × 22 mm6 parts6LCERN-OHL-S-2.02
Similar boards
Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Sram dev board
Wren6991
50 × 50 mm12 parts2LNo license508
ESP32
Chrismettal
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446