Rect 24-5 16
About the Rect 24-5 16 PCB
Rect 24-5 16 is an open source PCB design by miniscope, published on GitHub under the CERN-OHL-S-2.0 license. It is a 6-layer board measuring 16 × 24.5 mm, with 6 components from 2 distinct parts.
By type, the board carries 4 capacitors and 2 test points.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Miniscope Zero hardware and software
Repository for Miniscope Zero: a fully wireless, single-cell-resolution miniature microscope for imaging neural dynamics in freely behaving animals.
Miniscope Zero is a miniature one-photon microscope that operates without tethers: power is delivered via quasistatic cavity resonance (QSCR) wireless power transfer, and imaging data is streamed over a high-bandwidth optical link. This repository hosts the project-specific hardware designs — the miniscope, the optical data acquisition hardware, and the QSCR arena — and points to the related software and hardware repositories.
Rect 24-5 16 bill of materials (BOM)
6 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TestPoint | TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP2 |
| 4 | C | C_0402_1005Metric | C1, C2, C3, C4 |
Rect 24-5 16 design files
The KiCad project lives in the miniscope/MiniscopeZero repository on GitHub; these links point at the commit this page was built from.
Rect 24-5 16: common questions
How big is the Rect 24-5 16 PCB?
The Rect 24-5 16 measures 16 × 24.5 mm, has 6 copper layers and is 0.8 mm thick.
How many components are on the Rect 24-5 16?
6 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rect 24-5 16 design files?
From the miniscope/MiniscopeZero repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rect 24-5 16 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which miniscope chose for the repository.
More boards in MiniscopeZero
Optical daq vga v0 4 1
80 × 70 mm84 parts4LCERN-OHL-S-2.02
Optical daq digitizer v0 4 1
60 × 70 mm83 parts4LCERN-OHL-S-2.02
Microchip SAMWLMS-v0 2 1-motherboard
14 × 9.2 mm80 parts8LCERN-OHL-S-2.02
Microchip SAMWLMS-v0 2 1-motherboard panel
48 × 37.5 mm80 parts8LCERN-OHL-S-2.02
WLMS-v0 2 9 daughterboard
27.3 × 31.8 mm43 parts4LCERN-OHL-S-2.02
Timer usb board v0 2
40 × 40 mm29 parts4LCERN-OHL-S-2.02
Optical rx brk7310 v0 1
100 × 65 mm13 parts4LCERN-OHL-S-2.02
C mount
370 × 146.7 mm6 parts2LCERN-OHL-S-2.02
Rect 20 20
20 × 20 mm6 parts6LCERN-OHL-S-2.02
Rect 22 18
18 × 22 mm6 parts6LCERN-OHL-S-2.02
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979