Devboard panelized
MITEVT·opel_11U_devboard·hardware/panelized/devboard_panelized.kicad_pcb
About the Devboard panelized PCB
Devboard panelized is an open source PCB design by MITEVT, published on GitHub. It is a 2-layer board measuring 201.9 × 148.6 mm, with 35 components from 17 distinct parts.
Other key parts include the ISO1050, LPC11C14, MCP2515_TSSOP and MCP1755. By type, the board carries 12 capacitors, 8 resistors, 5 ICs, 4 connectors, 4 diodes and 2 switches.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Devboard panelized
Devboard panelized bill of materials (BOM)
35 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ISO1050 | MSOP-8_3x3mm_Pitch0.65mm | U1, U4 |
| 1 | LPC11C14 | LQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | MCP2515_TSSOP | TSSOP-20_4.4x6.5mm_Pitch0.65mm | U3 |
| 1 | MCP1755 | SOT-23-5 | U5 |
| 1 | CONN_01X17 | Pin_Header_Straight_1x17 | P1 |
| 1 | CONN_01X06 | Pin_Header_Straight_1x06 | P2 |
| 2 | CONN_01X04 | Pin_Header_Straight_1x04 | P4, P5 |
| 1 | SPST | SW_SPST_EVPBF | SW1 |
| 1 | SPST | SW_Micro_SPST | SW2 |
| 4 | LED | LED-0805 | D1, D2, D3, D4 |
| 2 | 10uF | C_0805_HandSoldering | C1, C4 |
| 6 | 0.1uF | C_0603_HandSoldering | C2, C3, C5, C8, C10, C11 |
| 1 | 1=uF | C_0805_HandSoldering | C6 |
| 3 | 1uF | C_0805_HandSoldering | C7, C9, C12 |
| 2 | 10k | R_0603_HandSoldering | R1, R5 |
| 4 | 100 | R_0603_HandSoldering | R2, R3, R4, R6 |
| 2 | 120 | R_0603_HandSoldering | R7, R8 |
Devboard panelized design files
The KiCad project lives in the MITEVT/opel_11U_devboard repository on GitHub; these links point at the commit this page was built from.
Devboard panelized: common questions
How big is the Devboard panelized PCB?
The Devboard panelized measures 201.9 × 148.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Devboard panelized?
35 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Devboard panelized design files?
From the MITEVT/opel_11U_devboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Devboard panelized design in my own project?
The repository has no license, so all rights stay with MITEVT. Use it as a reference, and ask the author before reusing the design.
More boards in opel_11U_devboard
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979