Final outline
MITEVT·opel_11U_devboard·final_outline/final_outline.kicad_pcb
About the Final outline PCB
Final outline is an open source PCB design by MITEVT, published on GitHub. It is a 2-layer board measuring 99.5 × 75 mm, with 31 components from 17 distinct parts.
Other key parts include the MCP2551-I/SN, LPC11C14, MCP1755-33, MCP1755-5 and Zsr1000gta. By type, the board carries 12 resistors, 10 capacitors, 5 ICs and 4 connectors.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Final outline
Final outline bill of materials (BOM)
31 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2551-I/SN | MSOP-8_3x3mm_Pitch0.65mm | U401 |
| 1 | LPC11C14 | LQFP-48_7x7mm_Pitch0.5mm | U403 |
| 1 | MCP1755-33 | SOT-23-5 | U501 |
| 1 | MCP1755-5 | SOT-23-5 | U502 |
| 1 | Zsr1000gta | SOT-223 | U503 |
| 1 | CANCONNECTOR | 776280-1 | P001 |
| 1 | CONN_01X14 | 776267-1 | P002 |
| 1 | ISP | Connector_Microfit3_Header_02x03_Angled_43045-060x | P100 |
| 1 | DEBUG_LED | Connector_Microfit3_Header_02x08_Angled_43045-160x | P101 |
| 2 | 10uF | C_0805_HandSoldering | C401, C406 |
| 2 | 0.1uF | C_0603_HandSoldering | C402, C405 |
| 3 | 10μ | C_0805_HandSoldering | C501, C503, C505 |
| 3 | .1μ | C_0603_HandSoldering | C502, C504, C506 |
| 1 | 20k | R_0603_HandSoldering | R1 |
| 1 | R | R_0603_HandSoldering | R201 |
| 8 | 100 | R_0603_HandSoldering | R301, R302, R303, R304, R305, R306, R307, R308 |
| 2 | 10k | R_0603_HandSoldering | R401, R402 |
Final outline design files
The KiCad project lives in the MITEVT/opel_11U_devboard repository on GitHub; these links point at the commit this page was built from.
Final outline: common questions
How big is the Final outline PCB?
The Final outline measures 99.5 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Final outline?
31 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Final outline design files?
From the MITEVT/opel_11U_devboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Final outline design in my own project?
The repository has no license, so all rights stay with MITEVT. Use it as a reference, and ask the author before reusing the design.
More boards in opel_11U_devboard
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979