HardLabs

Generic Pan Tilt Home Sensor

mitmedialab·generic-pan-tilt-pcb·generic-pan-tilt-home-sensor-pcb/generic-pan-tilt-home-sensor-pcb.kicad_pcb

Generic Pan Tilt Home Sensor PCB layout, top view — open source board by mitmedialab

About the Generic Pan Tilt Home Sensor PCB

Generic Pan Tilt Home Sensor is an open source PCB design by mitmedialab, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 15 × 25.9 mm, with 3 components from 3 distinct parts.

Other key parts include the AH1806-W-7. By type, the board carries 1 IC, 1 connector and 1 capacitor.

It belongs with the sensors designs in this gallery.

From the project

Generic Pan Tilt PCB sources

Generic Pan Tilt PCB ====================

This repository contains the KiCAD source files for the printed circuit boards in the Generic Pan Tilt.

For each Generic Pan Tilt you will need: - 1x generic-pan-tilt-pcb - 2x generic-pan-tilt-motor-pcb - 1x generic-pan-tilt-home-sensor-pcb

Schematic PDFs, gerbers, bills of materials (including common vendor part numbers), and 3D models may be generated by running KiBot in each directory.

Generic Pan Tilt Home Sensor, from the project README
From the project README

Main components on the Generic Pan Tilt Home Sensor

AH1806-W-7

Generic Pan Tilt Home Sensor bill of materials (BOM)

3 components, 3 distinct parts.

QtyPartRefs
1
AH1806-W-7
U1
1
B4B-PH-SM4-TB
J1
1
0.1µF
C2

Generic Pan Tilt Home Sensor design files

The KiCad project lives in the mitmedialab/generic-pan-tilt-pcb repository on GitHub; these links point at the commit this page was built from.

Generic Pan Tilt Home Sensor: common questions

How big is the Generic Pan Tilt Home Sensor PCB?

The Generic Pan Tilt Home Sensor measures 15 × 25.9 mm, has 2 copper layers and is 1 mm thick.

How many components are on the Generic Pan Tilt Home Sensor?

3 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Generic Pan Tilt Home Sensor design files?

From the mitmedialab/generic-pan-tilt-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Generic Pan Tilt Home Sensor design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which mitmedialab chose for the repository.

More boards in generic-pan-tilt-pcb

Similar boards