Spectre
mkrmx·spectre·smt/spectre.kicad_pcb
About the Spectre PCB
Spectre is an open source PCB design by mkrmx, published on GitHub under the MIT license. It is a 2-layer board measuring 42 × 32 mm, with 38 components from 22 distinct parts.
Other key parts include the L78M05ABDT, DRV5033FAQDBZR and LM393DR. By type, the board carries 18 resistors, 6 capacitors, 4 transistors, 4 diodes, 3 ICs and 2 connectors.
It belongs with the sensors designs in this gallery.
From the project
Sensor de iluminación por medio de Hall + LDR
Ahora el Hall ya no habilita a Q1 directamente. Pasa por un RC y por la segunda mitad del LM393 (U3B), que ya estaba en la placa sin usar.
Funcionamiento: - Al abrir: HALLOUT sube y C6 se carga por R11 + R15 (110 kΩ). A los ≈ 1.4–1.6 s DELAY cruza los 2.5 V, ARM sube y Q1 queda habilitado. Para entonces la LDR (con su filtro C3) ya leyó la luz real. - De noche enciende con ese pequeño "despertar". - De día ya no se queda encendida. - Al cerrar: D4 descarga C6 de inmediato, así que una reapertura rápida vuelve a tener retardo. - Ajuste del retardo: C6 pasó de 10 µF (≈ 0.6–0.75 s) a 22 µF…

Main components on the Spectre
Spectre bill of materials (BOM)
38 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L78M05ABDT L78M05 | TO-252-2 | U1 |
| 1 | DRV5033FAQDBZR DRV5033FA | SOT-23-3 | U2 |
| 1 | LM393DR LM393 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 3 | MMBT2222A | SOT-23 | Q1, Q2, Q3 |
| 1 | IRLR2905TRPBF IRLR2905 | TO-252-2 | Q4 |
| 1 | B2P-VH 12V IN | JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J1 |
| 1 | B2P-VH LED 12V | JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J2 |
| 1 | GL5528 | R_LDR_5.1x4.3mm_P3.4mm_Vertical | LDR1 |
| 1 | M7 | D_SMA | D1 |
| 3 | 1N4148W | D_SOD-123 | D2, D3, D4 |
| 1 | 0.33uF | C_0805_2012Metric | C1 |
| 1 | 0.1uF | C_0805_2012Metric | C2 |
| 1 | 47uF 16V | CP_Elec_5x5.3 | C3 |
| 1 | 22uF 16V | CP_Elec_4x5.4 | C4 |
| 1 | 0.1uF | C_0603_1608Metric | C5 |
| 1 | 22uF | C_0805_2012Metric | C6 |
| 9 | 10K 10k | R_0603_1608Metric | R1, R2, R3, R4, R8, R10, R11, R12 +1 |
| 1 | 1k | R_0603_1608Metric | R5 |
| 5 | 100K 100k | R_0603_1608Metric | R6, R13, R15, R16, R17 |
| 1 | 1M | R_0603_1608Metric | R7 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10k trim | Potentiometer_Bourns_3314J_Vertical | R9 |
| 1 | 68K 68k | R_0603_1608Metric | R14 |
Spectre design files
The KiCad project lives in the mkrmx/spectre repository on GitHub; these links point at the commit this page was built from.
- Layoutsmt/spectre.kicad_pcb
- Schematicsmt/spectre.kicad_sch
- BOMsmt/fab/spectre-BOM.csv
Spectre: common questions
How big is the Spectre PCB?
The Spectre measures 42 × 32 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Spectre?
38 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Spectre design files?
From the mkrmx/spectre repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Spectre design in my own project?
Yes, under the terms of its MIT license, which mkrmx chose for the repository.
More boards in spectre
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956