9 open source boards using the L78M05ABDT
Real designs built with the L78M05ABDT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Digiefx board
mesotokyo
50 × 50 mm64 parts4LNo license1AVR/Arduino
MainBoard
Finomnis
100 × 40 mm33 parts2LMIT1AVR/Arduino
Panel
Telekomak
110 × 121 mm79 parts2LNo license0ESP32
Dew control
ncleesattel
130 × 120 mm77 parts2LGPL-3.00Spectre
mkrmx
42 × 32 mm38 parts2LMIT0AVR/Arduino
FT MainBoard
Telekomak
110 × 75 mm62 parts2LNo license0Spectre tht
mkrmx
46 × 40 mm38 parts2LMIT0STM32
DEVboard1
NTURacingTeam
100 × 100 mm170 parts2LNo license4AVR/Arduino
USB C PD PSU
niektb
24 × 100 mm65 parts2LCC-BY-SA-4.034
How designs wire the L78M05ABDT
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the L78M05ABDT connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to 12V on 6 of 7 designs.
- The OUT pin is tied to 5V on 6 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 12V 86% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| OUTpin 3 | Connected to: 5V 86% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include USB C PD PSU by niektb, DEVboard1 by NTURacingTeam, MainBoard by Finomnis and Digiefx board by mesotokyo.
The L78M05ABDT in open source designs
The gallery holds 9 open source boards using the L78M05ABDT from 7 GitHub repositories; a typical one measures about 100 × 75 mm and carries around 64 components.
89% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is USB C PD PSU by niektb.
Microcontrollers on boards using the L78M05ABDT
What boards using the L78M05ABDT are built for
L78M05ABDT: common questions
Where can I find a L78M05ABDT reference design?
Each of the 9 boards on this page is a real design using the L78M05ABDT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L78M05ABDT IN pin connected?
The IN pin is tied to 12V on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the L78M05ABDT.
How is the L78M05ABDT OUT pin connected?
The OUT pin is tied to 5V on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the L78M05ABDT.
Which microcontrollers do boards using the L78M05ABDT use?
Most are built on AVR/Arduino (4), ESP32 (2) and STM32 (1).
How big is a typical board using the L78M05ABDT?
The median is 100 × 75 mm, and 89% are two-layer designs.
What is the most popular open source board using the L78M05ABDT?
By GitHub stars, USB C PD PSU by niektb, with 34 stars.
Can I simulate one of these boards using the L78M05ABDT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.