Tp4056-Li po charger module
MohamedHassanExp·Tp4056-Li-po-charger-module
About the Tp4056-Li po charger module
Tp4056-Li po charger module is an open source PCB design by MohamedHassanExp, published on GitHub under the MIT license. It is a 2-layer board measuring 21 × 25.2 mm, with 26 components from 19 distinct parts.
Other key parts include the TP4056-42-ESOP8, DW01A and FS8205A. By type, the board carries 9 resistors, 7 connectors, 4 capacitors, 3 ICs and 2 diodes.
It belongs with the power & battery designs in this gallery.
From the project
A custom-designed printed circuit board (PCB) for a Lithium-Polymer (Li-Po) battery charging module based on the TP4056 IC.
A custom-designed printed circuit board (PCB) for a Lithium-Polymer (Li-Po) battery charging module based on the TP4056 IC.
This project contains the complete hardware design files for a TP4056-based Li-Po charger circuit. It is designed to safely charge single-cell lithium batteries and includes standard protection circuitry for overcharge, over-discharge, and short-circuit conditions.
Main components on the Tp4056-Li po charger module
Tp4056-Li po charger module bill of materials (BOM)
26 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U1 |
| 1 | DW01A | SOT-23-6 | U2 |
| 1 | FS8205A | SOT-23-6 | U3 |
| 1 | USB_C_RECEPTACLE_POWERONLY_6P USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | J1 |
| 1 | INPUT+ | TestPoint_THTPad_3.0x3.0mm_Drill1.5mm | J2 |
| 1 | OUT+ | TestPoint_THTPad_3.0x3.0mm_Drill1.5mm | J3 |
| 1 | BATT+ | TestPoint_THTPad_3.0x3.0mm_Drill1.5mm | J4 |
| 1 | BATT- | TestPoint_THTPad_3.0x3.0mm_Drill1.5mm | J5 |
| 2 | GND | TestPoint_THTPad_3.0x3.0mm_Drill1.5mm | J6, J7 |
| 1 | Thermistor_NTC | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | TH1 |
| 1 | Red | LED_0603_1608Metric | D1 |
| 1 | Green | LED_0603_1608Metric | D2 |
| 2 | 0U1 0u1 | C_0603_1608Metric | C1, C3 |
| 2 | 10U 10u | C_0603_1608Metric | C2, C4 |
| 3 | 1k | R_0603_1608Metric | R1, R2, R6 |
| 2 | 5k | R_0603_1608Metric | R3, R4 |
| 1 | 10K 10k | R_0603_1608Metric | R5 |
| 1 | 100 | R_0603_1608Metric | R7 |
| 2 | 5K1 5k1 | R_0603_1608Metric | R8, R9 |
Tp4056-Li po charger module design files
The KiCad project lives in the MohamedHassanExp/Tp4056-Li-po-charger-module repository on GitHub; these links point at the commit this page was built from.
Tp4056-Li po charger module: common questions
How big is the Tp4056-Li po charger module?
The Tp4056-Li po charger module measures 21 × 25.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tp4056-Li po charger module?
26 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tp4056-Li po charger module design files?
From the MohamedHassanExp/Tp4056-Li-po-charger-module repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tp4056-Li po charger module design in my own project?
Yes, under the terms of its MIT license, which MohamedHassanExp chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k