HardLabs

BoSL Camera dev

Monash-BoSL·BoSLcam·EDA/nRF_dev/nRF_dev.kicad_pcb

BoSL Camera dev PCB layout, top view — open source Nordic nRF board by Monash-BoSL

About the BoSL Camera dev PCB

BoSL Camera dev is an open source Nordic nRF PCB design by Monash-BoSL, published on GitHub. It is a 2-layer board measuring 78.2 × 100 mm, with 50 components from 35 distinct parts.

Its main chip is the NRF9160-SICA, from the Nordic nRF family. Other key parts include the 23LCV1024-I/SN, MCP1700T-3302E/TT, OV7675pcb, BGA524N6E6327XTSA1 and MSQA6V1W5T2G. By type, the board carries 15 capacitors, 11 connectors, 8 resistors, 7 ICs, 3 jumpers and 2 switches.

It belongs with the iot & wireless designs in this gallery.

From the project

Hardware repository for the BoSLcam, IoT camera.

Main components on the BoSL Camera dev

23LCV1024-I/SNMCP1700T-3302E/TTNRF9160-SICAOV7675pcbBGA524N6E6327XTSA1MSQA6V1W5T2GMIC94093YC6

BoSL Camera dev bill of materials (BOM)

50 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
23LCV1024-I/SN
U1
1
MCP1700T-3302E/TT
MCP1700-3302E_SOT23
U2
1
NRF9160-SICA
NRF9160
U3
1
OV7675pcb
U4
1
BGA524N6E6327XTSA1
BGA524N6
U5
1
MSQA6V1W5T2G
U6
1
MIC94093YC6
SIP32508DT-T1-GE3
U7
1
USB_B_Micro
J1
1
Jack-DC
J2
1
Micro_SD_Card
J3
2
Conn_01x08_Male
J4, J7
1
OV7675_DBG
J5
1
FH26W-25S-0.3SHW(60)
J6
1
Conn_01x15_Male
J8
1
SIM
J9
1
nRF_DBG
J10
1
UART
J11
1
2337019-1
AT-MAIN
AT1
1
2337019-1
AT-GNSS
AT2
2
.
JP1, JP3
Show 15 more
QtyPartRefs
1
.
JP2
1
SKTHAHE010
RST
SW1
1
SKTHAHE010
BTA
SW2
1
LED
D1
1
MLG0603P9N1HT000
9.1 nH
L1
1
PCG1A101MCL1GS
100 uF
C1
7
100 nF
C2, C3, C5, C8, C11, C18, C19
2
10 uF
C4, C17
2
15 pF
C6, C9
1
1 μF
C7
1
220 pF
C10
1
1 nF
C12
1
100 kΩ
R1
6
10 kΩ
R2, R3, R4, R5, R6, R8
1
39 Ω
R7

BoSL Camera dev design files

The KiCad project lives in the Monash-BoSL/BoSLcam repository on GitHub; these links point at the commit this page was built from.

BoSL Camera dev: common questions

What microcontroller does the BoSL Camera dev use?

The BoSL Camera dev is built around the NRF9160-SICA, from the Nordic nRF family.

How big is the BoSL Camera dev PCB?

The BoSL Camera dev measures 78.2 × 100 mm, has 2 copper layers and is 1 mm thick.

How many components are on the BoSL Camera dev?

50 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BoSL Camera dev design files?

From the Monash-BoSL/BoSLcam repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the BoSL Camera dev design in my own project?

The repository has no license, so all rights stay with Monash-BoSL. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the BoSL Camera dev without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in BoSLcam

Similar boards