3 open source boards using the MIC94093YC6
Real designs built with the MIC94093YC6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
BoSL Camera dev
Monash-BoSL
78.2 × 100 mm50 parts2LNo license0Debugger2
rishabh110493
65 × 30 mm65 parts2LNo license1Nordic nRF
BoSLcam
Monash-BoSL
81 × 15 mm47 parts4LNo license0
The MIC94093YC6 in open source designs
The gallery holds 3 open source boards using the MIC94093YC6 from 2 GitHub repositories; a typical one measures about 78.2 × 30 mm and carries around 50 components.
67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Debugger2 by rishabh110493.
Microcontrollers on boards using the MIC94093YC6
What boards using the MIC94093YC6 are built for
MIC94093YC6: common questions
Where can I find a MIC94093YC6 reference design?
Each of the 3 boards on this page is a real design using the MIC94093YC6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC94093YC6 use?
Most are built on Nordic nRF (2).
How big is a typical board using the MIC94093YC6?
The median is 78.2 × 30 mm, and 67% are two-layer designs.
What is the most popular open source board using the MIC94093YC6?
By GitHub stars, Debugger2 by rishabh110493, with 1 stars.
Can I simulate one of these boards using the MIC94093YC6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.