HardLabs

BoSLcam

Monash-BoSL·BoSLcam·EDA/owts/owts.kicad_pcb

BoSLcam PCB layout, top view — open source Nordic nRF board by Monash-BoSL

About the BoSLcam PCB

BoSLcam is an open source Nordic nRF PCB design by Monash-BoSL, published on GitHub. It is a 4-layer board measuring 81 × 15 mm, with 47 components from 31 distinct parts.

Its main chip is the NRF9160-SICA, from the Nordic nRF family. Other key parts include the 23LCV1024-I/SN, MCP1700T-3302E/TT, BGA524N6E6327XTSA1, MSQA6V1W5T2G and MIC94093YC6. By type, the board carries 15 capacitors, 9 resistors, 6 ICs, 6 connectors, 4 diodes and 2 switches.

It belongs with the iot & wireless designs in this gallery.

From the project

Hardware repository for the BoSLcam, IoT camera.

Main components on the BoSLcam

23LCV1024-I/SNMCP1700T-3302E/TTNRF9160-SICABGA524N6E6327XTSA1MSQA6V1W5T2GMIC94093YC6

BoSLcam bill of materials (BOM)

47 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
23LCV1024-I/SN
U1
1
MCP1700T-3302E/TT
MCP1700-3302E_SOT23
U2
1
NRF9160-SICA
NRF9160
U3
1
BGA524N6E6327XTSA1
BGA524N6
U5
1
MSQA6V1W5T2G
U6
1
MIC94093YC6
MIC94093YC6-TR
U7
1
DMN2310U
Q1
1
Jack-DC
J2
1
Micro_SD_Card
J3
1
UART
J4
1
FH26W-25S-0.3SHW(60)
J6
1
SIM
J9
1
nRF_DBG
J10
1
2337019-1
AT-MAIN
AT1
1
2337019-1
AT-GNSS
AT2
1
SDHC PWR
JP1
1
SKTHAHE010
RST
SW1
1
SKTHAHE010
BTA
SW2
1
LED
D1
3
XQAAWT-02-0000-00000B4E3
XQAAWT-02-0000-00000B4E3n
D2, D3, D4
Show 11 more
QtyPartRefs
1
MLG0603P9N1HT000
9.1 nH
L1
1
PCG1A101MCL1GS
100 uF
C1
7
100 nF
C2, C3, C5, C8, C11, C18, C19
2
10 uF
C4, C17
2
15 pF
C6, C9
1
1 μF
C7
1
220 pF
C10
1
1 nF
C12
3
49 Ω
R1, R3, R9
5
10 kΩ
R2, R4, R5, R6, R8
1
39 Ω
R7

BoSLcam design files

The KiCad project lives in the Monash-BoSL/BoSLcam repository on GitHub; these links point at the commit this page was built from.

BoSLcam: common questions

What microcontroller does the BoSLcam use?

The BoSLcam is built around the NRF9160-SICA, from the Nordic nRF family.

How big is the BoSLcam PCB?

The BoSLcam measures 81 × 15 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the BoSLcam?

47 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BoSLcam design files?

From the Monash-BoSL/BoSLcam repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the BoSLcam design in my own project?

The repository has no license, so all rights stay with Monash-BoSL. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the BoSLcam without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in BoSLcam

Similar boards