HardLabs

IMUBreakout

mpkendall·Tiny4FSK-Ecosystem·BreakoutBoards/IMUBreakout/IMUBreakout.kicad_pcb

IMUBreakout PCB layout, top view — open source board by mpkendall

About the IMUBreakout PCB

IMUBreakout is an open source PCB design by mpkendall, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 23.3 × 20.9 mm, with 9 components from 6 distinct parts.

Other key parts include the ICM-42607-P. By type, the board carries 4 capacitors, 2 connectors, 2 resistors and 1 IC.

It belongs with the sensors, dev boards & breakouts and power & battery designs in this gallery.

From the project

Set of expansion boards, sensor breakouts, and additional modules to operate with the Tiny4FSK tracking system.

Code in the Tiny4FSK repository already implements automatic sensor, SD card, and screen scanning and initialization. Functions pertaining to these features are configurable in both config.h and the main Tiny4FSK.ino file.

To get started, solder female headers to the 2.54mm pins on the back side of the shield. To interface with the Tiny4FSK board, additionally solder 2.54mm male header rows to the USB, power, and data headers on the Tiny4FSK. Mounting them for alignment may assist with soldering.

IMUBreakout, from the project README
From the project README

Main components on the IMUBreakout

ICM-42607-P

IMUBreakout bill of materials (BOM)

9 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ICM-42607-P
U1
1
C51940130
Qwicc
J5
1
C160405
IMU Connection
J10
2
1UF
1uF
C1, C2
2
100NF
100nF
C5, C6
2
4.7K
4.7k
R1, R2

IMUBreakout design files

The KiCad project lives in the mpkendall/Tiny4FSK-Ecosystem repository on GitHub; these links point at the commit this page was built from.

IMUBreakout: common questions

How big is the IMUBreakout PCB?

The IMUBreakout measures 23.3 × 20.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the IMUBreakout?

9 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the IMUBreakout design files?

From the mpkendall/Tiny4FSK-Ecosystem repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the IMUBreakout design in my own project?

Yes, under the terms of its GPL-3.0 license, which mpkendall chose for the repository.

More boards in Tiny4FSK-Ecosystem

Similar boards