Generator 5351 rect sine
About the Generator 5351 rect sine PCB
Generator 5351 rect sine is an open source STM32 PCB design by MR-DOS, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 102.4 × 102.4 mm, with 280 components from 68 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the AMS1117-3.3, NE612, PE4259, IAM81008 and PE4306. By type, the board carries 99 capacitors, 81 resistors, 27 inductors, 24 ICs, 21 transistors and 12 diodes.
From the project
Rectangular and sine generator with Si5351 working up to 200 MHz
Main components on the Generator 5351 rect sine
Generator 5351 rect sine bill of materials (BOM)
280 components, 68 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | AMS1117-3.3 | SOT-223-3_TabPin2 | U101, U1901 |
| 2 | NE612 | SO-8_5.3x6.2mm_P1.27mm | U601, U602 |
| 8 | PE4259 | SOT363(TSSOP6) | U701, U801, U1101, U1201, U1401, U1501, U1601, U1701 |
| 1 | IAM81008 | SO-8_5.3x6.2mm_P1.27mm | U1001 |
| 1 | PE4306 | QFN-20-1EP_4x4mm_Pitch0.5mm | U1801 |
| 2 | MCP4725 | SOT-23-6_Handsoldering | U1902, U1904 |
| 1 | STM32F103C8Tx | TQFP-48_7x7mm_P0.5mm | U1903 |
| 4 | USBLC6-2SC6 | SOT-23-6 | U1905, U1906, U1907, U1908 |
| 1 | Si5351A | MSOP-10_3x3mm_P0.5mm | U2001 |
| 1 | UG-2864KSWEG01 | UG-2864KSWEG01 | U2101 |
| 1 | AD8307 | SOIC-8_3.9x4.9mm_P1.27mm | U2301 |
| 12 | 2SC5773 | SC-59_Handsoldering | Q601, Q602, Q603, Q604, Q605, Q606, Q607, Q608 +4 |
| 4 | BC817 | SOT-23_Handsoldering | Q613, Q614, Q615, Q616 |
| 1 | BSS84 | SOT-23_Handsoldering | Q1901 |
| 4 | 2N7002 | SOT-23_Handsoldering | Q2201, Q2202, Q2203, Q2204 |
| 1 | 449-LFXTAL072604CUTT 25MHz 8pF | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y2001 |
| 1 | Conn_Coaxial | Molex_SMA_Jack_Edge_Mount_Chinese | J101 |
| 1 | Conn_01x05 | JST_VH_B5PS-VH_1x05_P3.96mm_Horizontal | J102 |
| 1 | Conn_01x04 | JST_VH_B4PS-VH_1x04_P3.96mm_Horizontal | J103 |
| 1 | USB_B_Mini | USB_Mini-B_Lumberg_2486_01_Horizontal | J104 |
Show 48 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Battery_Cell | BatteryHolder_Keystone_3034_1x20mm | BT1901 |
| 6 | SW_SPST | SW_SPST_TL3342 | SW2201, SW2202, SW2203, SW2205, SW2206, SW2207 |
| 1 | Rotary_Encoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2204 |
| 3 | TC-1T+ | AT224-1A | T601, T1001, T1002 |
| 8 | 1N4148WS | D_SOD-323 | D201, D202, D203, D204, D205, D206, D207, D208 |
| 4 | LED_GRN | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2201, D2202, D2203, D2204 |
| 1 | 220n | L_0805_2012Metric_Pad1.33x1.40mm_HandSolder | L201 |
| 8 | 150n | L_0805_2012Metric_Pad1.33x1.40mm_HandSolder | L202, L203, L502, L503, L505, L902, L903, L905 |
| 5 | 33n | L_0805_2012Metric_Pad1.33x1.40mm_HandSolder | L301, L401, L504, L904, L1301 |
| 9 | 82n | L_0805_2012Metric_Pad1.33x1.40mm_HandSolder | L302, L303, L304, L402, L403, L404, L1302, L1303 +1 |
| 2 | 68n | L_0805_2012Metric_Pad1.33x1.40mm_HandSolder | L501, L901 |
| 2 | 1u | L_0805_2012Metric_Pad1.33x1.40mm_HandSolder | L601, L1901 |
| 14 | 100n | C_0805_2012Metric_Pad1.33x1.40mm_HandSolder | C101, C102, C202, C613, C616, C617, C1802, C1902 +6 |
| 22 | 10n | C_0805_2012Metric_Pad1.33x1.40mm_HandSolder | C201, C602, C603, C604, C605, C608, C610, C611 +14 |
| 6 | 24p | C_0805_2012Metric_Pad1.33x1.40mm_HandSolder | C301, C303, C401, C403, C1301, C1303 |
| 3 | 27p | C_0805_2012Metric_Pad1.33x1.40mm_HandSolder | C302, C402, C1302 |
| 8 | 47p | C_0805_2012Metric_Pad1.33x1.40mm_HandSolder | C501, C502, C504, C901, C902, C904, C1911, C1915 |
| 2 | 6p8 | C_0805_2012Metric_Pad1.33x1.40mm_HandSolder | C503, C903 |
| 2 | 3p3 | C_0805_2012Metric_Pad1.33x1.40mm_HandSolder | C505, C905 |
| 6 | 100p | C_0805_2012Metric_Pad1.33x1.40mm_HandSolder | C601, C606, C607, C609, C615, C1005 |
| 29 | 1n | C_0805_2012Metric_Pad1.33x1.40mm_HandSolder | C618, C620, C701, C801, C1002, C1003, C1006, C1007 +21 |
| 2 | 2u2 | C_0805_2012Metric_Pad1.33x1.40mm_HandSolder | C2101, C2102 |
| 1 | 4u7 | C_0805_2012Metric_Pad1.33x1.40mm_HandSolder | C2103 |
| 4 | 1u | C_0805_2012Metric_Pad1.33x1.40mm_HandSolder | C2104, C2105, C2306, C2308 |
| 5 | 1k5 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R201, R613, R616, R617, R1906 |
| 6 | 51 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R202, R208, R209, R214, R215, R216 |
| 2 | 100 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R203, R206 |
| 1 | 750 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R204 |
| 1 | 56 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R205 |
| 1 | 50 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R207 |
| 11 | 10k | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R210, R211, R212, R213, R1801, R1802, R1904, R2208 +3 |
| 2 | 15k | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R601, R603 |
| 1 | 3.3 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R602 |
| 4 | 22 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R604, R605, R1907, R1908 |
| 2 | 0R | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R606, R607 |
| 6 | 3k3 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R608, R609, R1902, R1903, R2203, R2204 |
| 1 | 2k2 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R610 |
| 3 | 10 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R611, R622, R623 |
| 2 | 330 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R612, R620 |
| 2 | 47 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R614, R615 |
| 2 | 15 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R618, R619 |
| 1 | 47k | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R621 |
| 5 | 470 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R624, R625, R627, R628, R1905 |
| 1 | 68k | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R626 |
| 3 | 4R7 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R1001, R1901, R2301 |
| 1 | 330k | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R2101 |
| 14 | 1k | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R2201, R2205, R2206, R2207, R2209, R2211, R2212, R2213 +6 |
| 4 | 220 | R_0805_2012Metric_Pad1.33x1.40mm_HandSolder | R2202, R2210, R2216, R2221 |
Generator 5351 rect sine design files
The KiCad project lives in the MR-DOS/generator_5351_rect_sine repository on GitHub; these links point at the commit this page was built from.
Generator 5351 rect sine: common questions
What microcontroller does the Generator 5351 rect sine use?
The Generator 5351 rect sine is built around the STM32F103C8Tx, from the STM32 family.
How big is the Generator 5351 rect sine PCB?
The Generator 5351 rect sine measures 102.4 × 102.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Generator 5351 rect sine?
280 components, from 68 distinct parts. The full bill of materials is listed on this page.
Where can I download the Generator 5351 rect sine design files?
From the MR-DOS/generator_5351_rect_sine repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Generator 5351 rect sine design in my own project?
Yes, under the terms of its GPL-3.0 license, which MR-DOS chose for the repository.
Can I test firmware for the Generator 5351 rect sine without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k
STM32Brain board STM32F407
61.8 × 73.2 mm69 parts2LGPL-3.01.2k