8 open source boards using the AD8307
Real designs built with the AD8307, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Generator 5351 rect sine
MR-DOS
102.4 × 102.4 mm280 parts2LGPL-3.06HF-QRP-ServiceMonitor
SmittyHalibut
76.2 × 127 mm53 parts2LApache-2.05PowerMeter
richardhosking
71.1 × 108 mm41 parts2LCC0-1.04AD8307-RF-Power-Meter
alauda-zz
41.9 × 29.2 mm26 parts2LNo license3Spectrum Analyzer: IF and Log Amp
dmsmccann
91.7 × 48.8 mm62 parts2LNo license0RP2040/RP2350
RFpower
GrzegorzJanucki
90 × 35 mm34 parts2LNo license0K9HZ 100W 11band LPF-Control
DRWJSCHMIDT
100 × 100 mm150 parts4LNo license18K9HZ 100W 11band LPF-Control
K0RGI
100 × 100 mm150 parts4LGPL-3.01
How designs wire the AD8307
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the AD8307 connects to, and the resistors, capacitors and other passives placed on it.
- The INP pin has a series capacitor on 8 of 8 designs, most often 10 nF (then 100 nF).
- The INM pin has a capacitor to GND on 7 of 8 designs, most often 100 nF (then 51 pF).
- The ENB pin has a capacitor to GND on 7 of 8 designs, most often 100 nF (then 10 nF).
- The INT pin is left unconnected on 8 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INMpin 1 | Connected to: Signal 100% |
|
| COMpin 2 | Connected to: GND 88% | — |
| OFSpin 3 | Connected to: Not connected 88% | — |
| OUTpin 4 | Connected to: AD7991YRJZ 25% |
|
| INTpin 5 | Connected to: Not connected 100% | — |
| ENBpin 6 | Connected to: Signal 88% |
|
| VPSpin 7 | Connected to: Signal 88% |
|
| INPpin 8 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include K9HZ 100W 11band LPF-Control by DRWJSCHMIDT, Generator 5351 rect sine by MR-DOS, HF-QRP-ServiceMonitor by SmittyHalibut and PowerMeterKICAD by richardhosking.
The AD8307 in open source designs
The gallery holds 8 open source boards using the AD8307 from 8 GitHub repositories; a typical one measures about 90.8 × 100 mm and carries around 58 components.
75% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is K9HZ 100W 11band LPF-Control by DRWJSCHMIDT.
Parts used alongside the AD8307
Microcontrollers on boards using the AD8307
What boards using the AD8307 are built for
AD8307: common questions
Where can I find a AD8307 reference design?
Each of the 8 boards on this page is a real design using the AD8307. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AD8307 INP pin connected?
The INP pin has a series capacitor on 8 of 8 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the AD8307.
How is the AD8307 INM pin connected?
The INM pin has a capacitor to GND on 7 of 8 designs, most often 100 nF (then 51 pF). Counted from the KiCad layouts of 8 open source designs using the AD8307.
How is the AD8307 ENB pin connected?
The ENB pin has a capacitor to GND on 7 of 8 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 8 open source designs using the AD8307.
What parts are used alongside the AD8307?
The 74HC237, AD7991YRJZ, CD74HC4514M96, L7808 and LM1117T-3.3 appear in the most repositories here.
Which microcontrollers do boards using the AD8307 use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the AD8307?
The median is 90.8 × 100 mm, and 75% are two-layer designs.
What is the most popular open source board using the AD8307?
By GitHub stars, K9HZ 100W 11band LPF-Control by DRWJSCHMIDT, with 18 stars.
Can I simulate one of these boards using the AD8307 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.