Optoin
About the Optoin PCB
Optoin is an open source PCB design by multigcs, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 13 × 22.5 mm, with 6 components from 6 distinct parts.
Other key parts include the LTV-817S. By type, the board carries 3 resistors, 1 IC, 1 connector and 1 diode.
From the project
riocore
Keywords: switch limit estop keyboard NEEDS: fpga
Main components on the Optoin
Optoin bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTV-817S | SMDIP-4_W9.53mm | U1 |
| 1 | opto_in | 691322110003 | J1 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 1 | 3k3 | R_1206_3216Metric | R85 |
| 1 | 560 | R_1206_3216Metric | R86 |
| 1 | 1k | R_1206_3216Metric | R87 |
Optoin design files
The KiCad project lives in the multigcs/riocore repository on GitHub; these links point at the commit this page was built from.
Optoin: common questions
How big is the Optoin PCB?
The Optoin measures 13 × 22.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Optoin?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Optoin design files?
From the multigcs/riocore repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Optoin design in my own project?
Yes, under the terms of its GPL-2.0 license, which multigcs chose for the repository.
More boards in riocore
W5500
52.3 × 21.8 mm34 parts2LGPL-2.091
FPGAEcp5-stamp
52.5 × 57.6 mm25 parts2LGPL-2.091
Symio
34.1 × 30.3 mm25 parts2LGPL-2.091
Uln out
23 × 35.3 mm17 parts2LGPL-2.091
Stepstick
24.9 × 21.9 mm8 parts2LGPL-2.091
Modbus
16.2 × 28.6 mm8 parts2LGPL-2.091
I2c
13.5 × 24.5 mm8 parts2LGPL-2.091
Encoder
19.8 × 26.8 mm5 parts2LGPL-2.091
Transistor
12.8 × 17.1 mm5 parts2LGPL-2.091
Rs422-slave
19.8 × 33.5 mm3 parts2LGPL-2.091
Rs422-master
19.8 × 33.5 mm3 parts2LGPL-2.091