8 open source boards using the open_mv
Real designs built with the open_mv, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Mainboard
MUNAKATA-EPC
120 × 120 mm151 parts2LNo license2AVR/Arduino
Main board Teensy
MUNAKATA-EPC
120 × 120 mm110 parts2LNo license2PIC
Main board
MUNAKATA-EPC
109.9 × 109.9 mm75 parts2LNo license2SensorBoard
MUNAKATA-EPC
100 × 100 mm91 parts2LNo license0RP2040/RP2350
Main board
MUNAKATA-EPC
110 × 110 mm35 parts2LNo license1Sensor
MUNAKATA-EPC
100 × 100 mm59 parts2LNo license0NXP
Main board
MUNAKATA-EPC
120 × 120 mm48 parts2LNo license0Sensors board
MUNAKATA-EPC
119.9 × 122.9 mm34 parts2LNo license0
The open_mv in open source designs
The gallery holds 8 open source boards using the open_mv from 3 GitHub repositories; a typical one measures about 115 × 115 mm and carries around 67 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Mainboard by MUNAKATA-EPC.
Parts used alongside the open_mv
Microcontrollers on boards using the open_mv
What boards using the open_mv are built for
open_mv: common questions
Where can I find a open_mv reference design?
Each of the 8 boards on this page is a real design using the open_mv. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the open_mv?
The Seeeduino_Xiao, Teensy4.0 and TSSP58038 appear in the most repositories here.
Which microcontrollers do boards using the open_mv use?
Most are built on AVR/Arduino (2), NXP (1), PIC (1) and RP2040/RP2350 (1).
How big is a typical board using the open_mv?
The median is 115 × 115 mm, and 100% are two-layer designs.
What is the most popular open source board using the open_mv?
By GitHub stars, Mainboard by MUNAKATA-EPC, with 2 stars.
Can I simulate one of these boards using the open_mv before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.