Starbie

musicalruh-glitch·Starbie

Starbie PCB layout, top view — open source ESP32 board by musicalruh-glitch

About the Starbie PCB

Starbie is an open source ESP32 PCB design by musicalruh-glitch, published on GitHub. It is a 2-layer board measuring 80 × 85 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

Blueprints for my hardware Starbie design!

1. Button One (BUTTONONEPIN/XIAO D2 in the Arduino code): - Normal View: Opens the radial menu - Menu View: Confirms/selects the currently highlighted menu action 2. Button Two (BUTTONTWOPIN/XIAO D3): - Toggles the stats screen on and off, + it shows Joy, Energy, Fullness, Temperature, and Humidity *Does not change pet's stats directly, simply lets you check on them

Starbie, from the project README
From the project README

Main components on the Starbie

Starbie bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DHT11
U1
1
XIAO-ESP32-C3-SMD
U2
1
CONN_01X04_PIN
Conn_01x04_Pin
J1
1
CONN_01X08_PIN
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10K
10k
R1

Starbie design files

The KiCad project lives in the musicalruh-glitch/Starbie repository on GitHub; these links point at the commit this page was built from.

Starbie: common questions

What microcontroller does the Starbie use?

The Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Starbie PCB?

The Starbie measures 80 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Starbie design files?

From the musicalruh-glitch/Starbie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Starbie design in my own project?

The repository has no license, so all rights stay with musicalruh-glitch. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Starbie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards