SilhouetteSync V1
myles-parfeniuk·SilhouetteSync·Hardware/Tracker_Band_V1/Tracker_Band_V1.kicad_pcb
About the SilhouetteSync V1 PCB
SilhouetteSync V1 is an open source ESP32 PCB design by myles-parfeniuk, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 19.2 × 25.9 mm, with 57 components from 26 distinct parts.
Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the BNO085, RT8010, MCP73832-2-AC, LM66200 and IN-PI15TAT5R5G5B. By type, the board carries 27 resistors, 11 capacitors, 9 ICs, 4 diodes, 2 switches and 1 transistor.
It belongs with the iot & wireless designs in this gallery.
From the project
Open source motion tracker band intended for athletics analytics.

Main components on the SilhouetteSync V1
SilhouetteSync V1 bill of materials (BOM)
57 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1-N4 | ESP32-C3-MINI-1_EXP | U1 |
| 1 | BNO085 | LGA-28_5.2x3.8mm_P0.5mm | U2 |
| 1 | RT8010 | DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U3 |
| 1 | MCP73832-2-AC | DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mm | U4 |
| 1 | LM66200 | SOT-5X3_DRL_TEX-L | U5 |
| 4 | IN-PI15TAT5R5G5B | IN-PI15_INL | U6, U7, U8, U9 |
| 1 | SSM6L56FE | SOT-563 | Q1 |
| 1 | 32.768kHz | OSC_ECS-1618-300-BN-TR | X1 |
| 1 | USB_C_USB20 | USB_C_Receptacle_G-Switch_GT-USB-7010ASV_local3d | J1 |
| 2 | EVP-AVAA1A | EVP-AVAA1A_PAN | SW1, SW2 |
| 3 | 1N4148WT | D_SOD-523 | D1, D2, D4 |
| 1 | GREEN | LED_0603_1608Metric | D3 |
| 1 | 4.7uH | L_Taiyo-Yuden_NR-30xx | L1 |
| 1 | 1u | C_0402_1005Metric | C1 |
| 4 | 10u | C_0805_2012Metric | C2, C3, C4, C5 |
| 6 | 100n | C_0402_1005Metric | C6, C7, C8, C9, C10, C11 |
| 10 | 10k | R_0402_1005Metric | R1, R3, R5, R15, R16, R19, R20, R25 +2 |
| 3 | 100k | R_0402_1005Metric | R2, R10, R11 |
| 3 | 2.2k | R_0402_1005Metric | R4, R18, R23 |
| 1 | 4.7k | R_0402_1005Metric | R6 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.1k | R_0402_1005Metric | R7, R8 |
| 2 | 0 | R_0402_1005Metric | R9, R24 |
| 1 | 120k | R_0402_1005Metric | R12 |
| 2 | 22 | R_0402_1005Metric | R13, R14 |
| 1 | 330 | R_0402_1005Metric | R17 |
| 2 | 1k | R_0402_1005Metric | R21, R22 |
SilhouetteSync V1 design files
The KiCad project lives in the myles-parfeniuk/SilhouetteSync repository on GitHub; these links point at the commit this page was built from.
SilhouetteSync V1: common questions
What microcontroller does the SilhouetteSync V1 use?
The SilhouetteSync V1 is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.
How big is the SilhouetteSync V1 PCB?
The SilhouetteSync V1 measures 19.2 × 25.9 mm, has 4 copper layers and is 1.0192 mm thick.
How many components are on the SilhouetteSync V1?
57 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the SilhouetteSync V1 design files?
From the myles-parfeniuk/SilhouetteSync repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SilhouetteSync V1 design in my own project?
Yes, under the terms of its GPL-3.0 license, which myles-parfeniuk chose for the repository.
Can I test firmware for the SilhouetteSync V1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in SilhouetteSync
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k