9 open source boards using the LM66200

Real designs built with the LM66200, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the LM66200

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the LM66200 connects to, and the resistors, capacitors and other passives placed on it.

  • The VOUT pins have a decoupling capacitor on 5 of 8 designs, most often 10 µF (then 2.2 µF).
  • The ON pin is tied to GND on 6 of 8 designs.
  • The VIN1 pin has a decoupling capacitor on 4 of 8 designs, most often 4.7 µF (then 10 µF).
GNDpin 1, 5Connected to: GND 100%
VOUTpin 2, 7Connected to: 5V 88%
  • Decoupling capacitor on 63% · 10 µF (8), 2.2 µF (6), 100 nF (4)
VIN1pin 3Connected to: 5V 75% · a signal 25%
  • Decoupling capacitor on 50% · 4.7 µF (1), 10 µF (1), 100 nF (1)
ONpin 4Connected to: GND 75%
VIN2pin 6Connected to: 5V 63% · a signal 38%
  • Decoupling capacitor on 38% · 10 µF (1), 100 nF (1), 2.2 µF (1)
STpin 8Connected to: Not connected 50% · a signal 50%
  • Pull-up to 3.3V on 38% · 10 kΩ (2), 100 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DEV-G2-NANO by theta-machines, Vaio re by CRImier, Lemon pcb swizzle by rianadon and RobotTEST-autonomous- by DDSC-Retr0.

The LM66200 in open source designs

The gallery holds 9 open source boards using the LM66200 from 8 GitHub repositories; a typical one measures about 75 × 65 mm and carries around 140 components.

89% use four copper layers or more, and 44% carry an open source license.

The most starred is DEV-G2-NANO by theta-machines.

Microcontrollers on boards using the LM66200

LM66200: common questions

Where can I find a LM66200 reference design?

Each of the 9 boards on this page is a real design using the LM66200. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LM66200 VOUT pin?

The VOUT pins have a decoupling capacitor on 5 of 8 designs, most often 10 µF (then 2.2 µF). Counted from the KiCad layouts of 8 open source designs using the LM66200.

How is the LM66200 ON pin connected?

The ON pin is tied to GND on 6 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the LM66200.

What decoupling capacitors do designs use on the LM66200 VIN1 pin?

The VIN1 pin has a decoupling capacitor on 4 of 8 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the LM66200.

What parts are used alongside the LM66200?

The FSUSB42MUX, LIS2MDL, LSM6DSV, MAX17048 and MAYA-W166-00B appear in the most repositories here.

Which microcontrollers do boards using the LM66200 use?

Most are built on RP2040/RP2350 (4), NXP (3) and ESP32 (2).

How big is a typical board using the LM66200?

The median is 75 × 65 mm, and 11% are two-layer designs.

What is the most popular open source board using the LM66200?

By GitHub stars, DEV-G2-NANO by theta-machines, with 338 stars.

Can I simulate one of these boards using the LM66200 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part