Rectifier Main
About the Rectifier Main PCB
Rectifier Main is an open source PCB design by mzuelch, published on GitHub under the MIT license. It is a 2-layer board measuring 38.1 × 101.6 mm, with 33 components from 24 distinct parts.
Other key parts include the TL072CDT and TL072. By type, the board carries 14 resistors, 6 diodes, 6 capacitors, 5 connectors and 2 ICs.
It belongs with the audio designs in this gallery.
From the project
Analog Synth Eurorack Modules
Main components on the Rectifier Main
Rectifier Main bill of materials (BOM)
33 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072CDT TL074 | DIP-14_W7.62mm_LongPads | U1 |
| 1 | TL072 | DIP-8_W7.62mm_LongPads | U2 |
| 1 | Negative HW | Jack_3.5mm_QingPu_WQP-PJ324M | J1 |
| 1 | Full Wave | Jack_3.5mm_QingPu_WQP-PJ324M | J2 |
| 1 | In | Jack_3.5mm_QingPu_WQP-PJ324M | J3 |
| 1 | Positive HW | Jack_3.5mm_QingPu_WQP-PJ324M | J4 |
| 1 | Power | Power_2x8_Horizontal | J5 |
| 2 | BAV99 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D3, D4 |
| 2 | BAV99 1N5817 | D_DO-41_SOD81_P10.16mm_Horizontal | D5, D6 |
| 1 | 100UF/6.3V 10uF/16V | CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 100n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C2 |
| 2 | 10UF/16V 100n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C3, C5 |
| 1 | 10UF/16V 10uF/16V | CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 100N 100n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C6 |
| 1 | 3K3 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 3K3 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 4 | 33K 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R7, R8 |
| 1 | 7K5 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 3 | 10K 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R10, R13 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10K 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 27K 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 1K5 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
Rectifier Main design files
The KiCad project lives in the mzuelch/CATs-Eurosynth repository on GitHub; these links point at the commit this page was built from.
Rectifier Main: common questions
How big is the Rectifier Main PCB?
The Rectifier Main measures 38.1 × 101.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rectifier Main?
33 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rectifier Main design files?
From the mzuelch/CATs-Eurosynth repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rectifier Main design in my own project?
Yes, under the terms of its MIT license, which mzuelch chose for the repository.
More boards in CATs-Eurosynth
MFOS Eight Stage Phase Shifter - Main
27.9 × 101.6 mm104 parts2LMIT165
Abakus Main
69.9 × 108 mm87 parts2LMIT165
VCF Diode Ladder Filter
27.9 × 101.6 mm65 parts2LMIT165
Dual VCA #2 Main
58.4 × 101.6 mm63 parts2LMIT165
Baby 8
68.6 × 107.3 mm62 parts2LMIT165
AVR/ArduinoHAGIWO Sync LFO Main
29.2 × 101.6 mm50 parts2LMIT165
Buffered Multiple SMD Main
38.1 × 101.6 mm49 parts2LMIT165
Slimline Clock Divider SMD Main
38.1 × 101.6 mm48 parts2LMIT165
Sample and Hold SMD Main
38.1 × 101.6 mm41 parts2LMIT165
Envelope Follower Main
31.8 × 101.6 mm31 parts2LMIT165
Similar boards
OtterCastAudioV2
Ottercast
50 × 49.3 mm216 parts4LMIT665
FunBox
GuitarML
59.7 × 67.5 mm63 parts2LMIT278
Eurorack pmod
apfaudio
35 × 110 mm116 parts4LCERN-OHL-S-2.0239
XassetteAsterisk
SdtElectronics
56 × 56 mm137 parts2LCERN-OHL-W-2.0229
Default patch
shmoergh
210.7 × 32.5 mm20 parts2LNo license214
Attenuator multiple
64 × 32 mm7 parts2LNo license214