18 open source boards using the TL072CDT
Real designs built with the TL072CDT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MFOS Eight Stage Phase Shifter - Main
mzuelch
27.9 × 101.6 mm104 parts2LMIT166Toolbox
StudioKAT
80.9 × 128.5 mm272 parts2LNo license11Joystick
StudioKAT
30 × 128.5 mm88 parts2LNo license6STM32
Cheep4
emeb
38.1 × 100 mm115 parts4LMIT3PIC
SynthBoard Left Rotary
wakimizufu
257 × 90.2 mm229 parts2LNo license1VCO
MateoHadzimustafic
53.9 × 64.8 mm82 parts2LApache-2.00- schematic only · 141 parts
POGO
jeffmhopkins
141 partsNo license0 Abakus Main
mzuelch
69.9 × 108 mm87 parts2LMIT166Anthracite PCB (Top)
trope-oshw
60 × 102 mm176 parts4LCERN-OHL-S-2.06STM32
Sg gain link
oats-center
76.2 × 89.1 mm64 parts4LNo license3PIC
SynthBoard
wakimizufu
155 × 80 mm123 parts2LNo license1VCF Diode Ladder Filter
mzuelch
27.9 × 101.6 mm65 parts2LMIT166Baby 8
mzuelch
68.6 × 107.3 mm62 parts2LMIT166AVR/Arduino
HAGIWO Sync LFO Main
mzuelch
29.2 × 101.6 mm50 parts2LMIT166Buffered Multiple SMD Main
mzuelch
38.1 × 101.6 mm49 parts2LMIT166STM32
Epc gain link
oats-center
76.2 × 89.1 mm27 parts4LNo license3Rectifier Main
mzuelch
38.1 × 101.6 mm33 parts2LMIT166Envelope Follower Main
mzuelch
31.8 × 101.6 mm31 parts2LMIT166
How designs wire the TL072CDT
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TL072CDT connects to, and the resistors, capacitors and other passives placed on it.
- The - pins have a series resistor on 7 of 8 designs, most often 100 kΩ (then 10 kΩ).
- The V- pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 4.7 µF).
- The V+ pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF).
- The 2OUT pin has a series resistor on 6 of 8 designs, most often 100 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1OUTpin 1 | Connected to: Signal 100% |
|
| -pin 2, 6 | Connected to: A connector 25% |
|
| +pin 3, 5 | Connected to: GND 56% · a signal 44% |
|
| V-pin 4 | Connected to: -12V 88% |
|
| 2OUTpin 7 | Connected to: A connector 25% |
|
| V+pin 8 | Connected to: 12V 88% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Abakus Main by mzuelch, Toolbox by StudioKAT, Joystick by StudioKAT and Anthracite PCB (Top) by trope-oshw.
The TL072CDT in open source designs
The gallery holds 18 open source boards using the TL072CDT from 9 GitHub repositories; a typical one measures about 53.9 × 101.6 mm and carries around 85 components.
76% are two-layer designs, the rest use four layers or more, and 61% carry an open source license.
The most starred is MFOS Eight Stage Phase Shifter - Main by mzuelch.
Parts used alongside the TL072CDT
Microcontrollers on boards using the TL072CDT
What boards using the TL072CDT are built for
TL072CDT: common questions
Where can I find a TL072CDT reference design?
Each of the 18 boards on this page is a real design using the TL072CDT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TL072CDT - pin?
The - pins have a series resistor on 7 of 8 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 8 open source designs using the TL072CDT.
What decoupling capacitors do designs use on the TL072CDT V- pin?
The V- pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the TL072CDT.
What decoupling capacitors do designs use on the TL072CDT V+ pin?
The V+ pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the TL072CDT.
Which microcontrollers do boards using the TL072CDT use?
Most are built on STM32 (3), PIC (2) and AVR/Arduino (1).
How big is a typical board using the TL072CDT?
The median is 53.9 × 101.6 mm, and 76% are two-layer designs.
What is the most popular open source board using the TL072CDT?
By GitHub stars, MFOS Eight Stage Phase Shifter - Main by mzuelch, with 166 stars.
Can I simulate one of these boards using the TL072CDT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.