Embedsys embedded educational board
nakul-biovaco·Embedsys-embedded-educational-board
About the Embedsys embedded educational board
Embedsys embedded educational board is an open source ESP32 PCB design by nakul-biovaco, published on GitHub under the MIT license. It is a 4-layer board measuring 125 × 85 mm, with 67 components from 50 distinct parts.
Its main chip is the ESP32-WROOM-32E-N4, from the ESP32 family. Other key parts include the BQ24075RGTR, CP2102N-A02-GQFN28 and USBLC6-2SC6. By type, the board carries 9 resistors, 8 capacitors, 4 ICs, 3 connectors, 2 transistors and 2 inductors.
It belongs with the sensors, iot & wireless and power & battery designs in this gallery.
From the project
Industrial-grade ESP32-WROOM-32E educational development board (4-layer ENIG PCB, BQ24075 power-path, dual regulators, ST7789 IPS display & SHT40 sensor). 0 DRC certified.
The ESP32 Educational Development Board is an industrial-grade, open-architecture modular platform engineered for embedded systems education, IoT research, and rapid hardware prototyping. It bridges the gap between basic microcontroller break-out boards and commercial hardware products by integrating:
- Autonomous Power Architecture: Texas Instruments BQ24075 dynamic power-path controller with seamless switching between USB-C, external DC (JST-PH), and LiPo/Li-Ion battery with onboard 1.5A linear charging. - Dual High-Efficiency Switching Regulators: - TPS63020DSJR Synchronous Buck-Boost…

Main components on the Embedsys embedded educational board
Embedsys embedded educational board bill of materials (BOM)
67 components, 50 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ24075RGTR Texas Instruments | VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U1 |
| 1 | ESP32-WROOM-32E-N4 Espressif Systems | ESP32-WROOM-32E | U2 |
| 1 | CP2102N-A02-GQFN28 Silicon Laboratories | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U3 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U4 |
| 2 | MMBT3904LT1G MMBT3904 onsemi | SOT-23 | Q1, Q2 |
| 1 | TYPE-C-31-M-12 Korean Hroparts Elec | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | 61301911121 CONN_LEFT_1x19 Wurth Elektronik | PinSocket_1x19_P2.54mm_Vertical | J2 |
| 1 | 61301911121 CONN_RIGHT_1x19 Wurth Elektronik | PinSocket_1x19_P2.54mm_Vertical | J3 |
| 1 | CST-931AP | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | 10uF 10V | C_0805_2012Metric | C_CHG_OUT1 |
| 1 | 0.1uF 16V | C_0402_1005Metric | C_CHG_OUT2 |
| 1 | 1.0uF | C_0603_1608Metric | C_DEC_TFT1 |
| 1 | 100nF | C_0603_1608Metric | C_DEC_TFT2 |
| 1 | 22pF | C_0402_1005Metric | C_FF1 |
| 1 | 10pF | C_0402_1005Metric | C_FF2 |
| 1 | GRM21BR71C106KE15L 10uF Murata | C_0805_2012Metric | C_IN1 |
| 1 | GRM155R71C104KA88D 10uF Murata | C_0805_2012Metric | C_IN2 |
| 2 | 10uF | C_0805_2012Metric | C_IN3, C_OUT4 |
| 4 | 0.1uF | C_0402_1005Metric | C_IN_BYP1, C_IN_BYP2, C_OUT_BYP1, C_OUT_BYP2 |
| 3 | 22uF | C_0805_2012Metric | C_OUT1, C_OUT2, C_OUT3 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ST7789V2_1.54_IPS ST7735S_0.96_TFT Waveshare / Generic | PinHeader_1x08_P2.54mm_Vertical | DS1 |
| 1 | MF-MSMF110/16-2 1.10A Bourns | Fuse_1206_3216Metric | F1 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J_5VAUX |
| 1 | 61300211121 Conn_01x02 Wurth Elektronik | PinHeader_1x02_P2.54mm_Vertical | J_EXT5V |
| 1 | GL5528 Senba Sensing | R_LDR_5.1x4.3mm_P3.4mm_Vertical | LDR1 |
| 1 | 3306F-1-103 10k Bourns | Potentiometer_Bourns_TC33X_Vertical | POT1 |
| 2 | RC0402FR-075K1L 5.1k 1% Yageo | R_0402_1005Metric | R_CC1, R_CC2 |
| 3 | 100k | R_0603_1608Metric | R_EN1, R_EN2, R_FB2 |
| 1 | 560k | R_0603_1608Metric | R_FB1 |
| 1 | 1.00M | R_0603_1608Metric | R_FB3 |
| 1 | 249k | R_0603_1608Metric | R_FB4 |
| 1 | 1.5k | R_0603_1608Metric | R_LED_5V |
| 1 | 1.58k 1% | R_0402_1005Metric | R_STAT1 |
| 1 | 3.00k 1% | R_0402_1005Metric | R_STAT2 |
| 1 | TPS63020DSJR | DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm | U_REG1 |
| 1 | TPS61023DRLR | SOT-563 | U_REG2 |
| 1 | Green | LED_0603_1608Metric | D_5VAUX |
| 1 | SMAJ5.0A Littelfuse | D_SMA | D1 |
| 1 | 1.5UH 1.5uH | L_Coilcraft_XxL4020 | L1 |
| 1 | 1.0UH 1.0uH | L_Wuerth_MAPI-2512 | L2 |
| 1 | GRM21BR71A106KE15L 10uF Murata | C_0805_2012Metric | C7 |
| 4 | GRM155R71C104KA88D 0.1uF Murata | C_0402_1005Metric | C8, C11, C13, C14 |
| 1 | GRM188R71C105KA12D 1uF Murata | C_0603_1608Metric | C9 |
| 1 | GRM21BR71A475KA73L 4.7uF Murata | C_0805_2012Metric | C10 |
| 1 | GRM21BR71C475KE51L 4.7uF Murata | C_0805_2012Metric | C12 |
| 4 | RC0402FR-0710KL 10k 1% Yageo | R_0402_1005Metric | R6, R7, R8, R9 |
| 2 | RC0402FR-07470RL 470 1% Yageo | R_0402_1005Metric | R10, R11 |
| 1 | RC0402FR-0722K1L 22.1k 1% Yageo | R_0402_1005Metric | R12 |
| 1 | RC0402FR-0747K5L 47.5k 1% Yageo | R_0402_1005Metric | R13 |
| 1 | RC0402FR-074K7L 4.7k 1% Yageo | R_0402_1005Metric | R14 |
Embedsys embedded educational board design files
The KiCad project lives in the nakul-biovaco/Embedsys-embedded-educational-board repository on GitHub; these links point at the commit this page was built from.
Embedsys embedded educational board: common questions
What microcontroller does the Embedsys embedded educational board use?
The Embedsys embedded educational board is built around the ESP32-WROOM-32E-N4, from the ESP32 family.
How big is the Embedsys embedded educational board?
The Embedsys embedded educational board measures 125 × 85 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Embedsys embedded educational board?
67 components, from 50 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Embedsys embedded educational board design files?
From the nakul-biovaco/Embedsys-embedded-educational-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Embedsys embedded educational board design in my own project?
Yes, under the terms of its MIT license, which nakul-biovaco chose for the repository.
Can I test firmware for the Embedsys embedded educational board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k