4 open source boards using the CH376S
Real designs built with the CH376S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Cocousbhost
barberd
98.3 × 87.3 mm32 parts2LGPL-3.03RISC-V
MC-10 Tape Emulator
SteveLRojas
102.1 × 73.8 mm95 parts4LNo license2CPC464-2MINIUSIFACII
Board-Folk
93.4 × 85 mm29 parts2LNo license10AVR/Arduino
PCMCIA-Card
NaokiS28
100.5 × 47 mm29 parts2LNo license16
The CH376S in open source designs
The gallery holds 4 open source boards using the CH376S from 4 GitHub repositories; a typical one measures about 99.4 × 79.4 mm and carries around 31 components.
75% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is PCMCIA-Card by NaokiS28.
Microcontrollers on boards using the CH376S
What boards using the CH376S are built for
CH376S: common questions
Where can I find a CH376S reference design?
Each of the 4 boards on this page is a real design using the CH376S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the CH376S use?
Most are built on AVR/Arduino (1) and RISC-V (1).
How big is a typical board using the CH376S?
The median is 99.4 × 79.4 mm, and 75% are two-layer designs.
What is the most popular open source board using the CH376S?
By GitHub stars, PCMCIA-Card by NaokiS28, with 16 stars.
Can I simulate one of these boards using the CH376S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.