HardLabs

Temperature board

nEDM-TUM·Temperature-Sensor-System·circuit_boards/temperature_board/temperature_board.kicad_pcb

Temperature board layout, top view — open source board by nEDM-TUM

About the Temperature board

Temperature board is an open source PCB design by nEDM-TUM, published on GitHub. It is a 2-layer board measuring 20 × 76 mm, with 12 components from 9 distinct parts.

Other key parts include the TSIC50XF and ST485. By type, the board carries 4 capacitors, 4 resistors, 2 ICs, 1 module and 1 connector.

It belongs with the sensors designs in this gallery.

From the project

System for reading/writing temperature sensors

Temperature-Sensor-System ==============

Sensor network system built for the nEDM experiment.

Features ------------------ - Both temperature and humidity sensors can be connected at any sensor socket. The sensor type will be automatically detected. - High temperature and humidity accuracy: Temperature sensors are calibrated to �0.1K and the humidity sensors to �1.8%rH. - A high number of connected sensors is supported. Currently 44 sensors are in use, however the system is designed to support at least 100 sensors and still be able to fulfill a sampling rate of 1Hz. If the sampling rate is…

Main components on the Temperature board

TSIC50XFST485

Temperature board bill of materials (BOM)

12 components, 9 distinct parts.

QtyPartRefs
1
TSIC50XF
U1
1
ST485
U2
1
VAL**
m3_loch
1
RJ45
J1
3
100nF
C1, C2, C4
1
10uF
C3
1
220
R1
2
22k
R2, R3
1
120
R4

Temperature board design files

The KiCad project lives in the nEDM-TUM/Temperature-Sensor-System repository on GitHub; these links point at the commit this page was built from.

Temperature board: common questions

How big is the Temperature board?

The Temperature board measures 20 × 76 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Temperature board?

12 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Temperature board design files?

From the nEDM-TUM/Temperature-Sensor-System repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Temperature board design in my own project?

The repository has no license, so all rights stay with nEDM-TUM. Use it as a reference, and ask the author before reusing the design.

More boards in Temperature-Sensor-System

Similar boards